On Wed, Jan 12, 2022 at 05:49:44PM -0300, Fabio Estevam wrote: > imx8mm-u-boot.dtsi passes the ATF load address via the > 'entry' and 'load' properties. > > Remove the step that performs the ATF_LOAD_ADDR export, which is > now unneeded. > > Signed-off-by: Fabio Estevam <feste...@denx.de>
Reviewed-by: Patrick Wildt <patr...@blueri.se> > --- > doc/board/nxp/imx8mm_evk.rst | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst > index b377c4de276d..b9e67b954fc2 100644 > --- a/doc/board/nxp/imx8mm_evk.rst > +++ b/doc/board/nxp/imx8mm_evk.rst > @@ -42,7 +42,6 @@ Build U-Boot > > $ export CROSS_COMPILE=aarch64-poky-linux- > $ make imx8mm_evk_defconfig > - $ export ATF_LOAD_ADDR=0x920000 > $ make > > Burn the flash.bin to MicroSD card offset 33KB: > -- > 2.25.1 >