Kirkwood uses macros KW_DEFADR_PCI_MEM and KW_DEFADR_PCI_IO for base address of PCIe mappings. Size of PCIe windows is not defined in any macro yet, so export them in new KW_DEFADR_PCI_MEM_SIZE and KW_DEFADR_PCI_IO_SIZE macros.
Kirkwood arch code already maps mbus windows for io and mem, so avoid calling mvebu_mbus_add_window_by_id() function which would try to do duplicate window mapping. Kirkwood PCIe controllers already use "marvell,kirkwood-pcie" DT compatible string, so mark pci_mvebu.c driver as compatible for it. Signed-off-by: Pali Rohár <p...@kernel.org> --- This patch depends on series "mvebu: Move PCIe code from serdes to PCIe driver": https://patchwork.ozlabs.org/project/uboot/list/?series=277906&state=* Tony, could you please test it in Kirwood hardware? --- arch/arm/mach-kirkwood/cpu.c | 4 ++-- arch/arm/mach-kirkwood/include/mach/cpu.h | 3 +++ drivers/pci/Kconfig | 6 +++--- drivers/pci/pci_mvebu.c | 16 ++++++++++++++++ 4 files changed, 24 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-kirkwood/cpu.c b/arch/arm/mach-kirkwood/cpu.c index e9571298a824..80f893ab369a 100644 --- a/arch/arm/mach-kirkwood/cpu.c +++ b/arch/arm/mach-kirkwood/cpu.c @@ -54,11 +54,11 @@ unsigned int kw_winctrl_calcsize(unsigned int sizeval) static struct mbus_win windows[] = { /* Window 0: PCIE MEM address space */ - { KW_DEFADR_PCI_MEM, 1024 * 1024 * 256, + { KW_DEFADR_PCI_MEM, KW_DEFADR_PCI_MEM_SIZE, KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_MEM }, /* Window 1: PCIE IO address space */ - { KW_DEFADR_PCI_IO, 1024 * 64, + { KW_DEFADR_PCI_IO, KW_DEFADR_PCI_IO_SIZE, KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_IO }, /* Window 2: NAND Flash address space */ diff --git a/arch/arm/mach-kirkwood/include/mach/cpu.h b/arch/arm/mach-kirkwood/include/mach/cpu.h index ea42182cf9c6..71c546f9acf6 100644 --- a/arch/arm/mach-kirkwood/include/mach/cpu.h +++ b/arch/arm/mach-kirkwood/include/mach/cpu.h @@ -68,6 +68,9 @@ enum kwcpu_attrib { #define KW_DEFADR_SPIF 0xE8000000 #define KW_DEFADR_BOOTROM 0xF8000000 +#define KW_DEFADR_PCI_MEM_SIZE (1024 * 1024 * 256) +#define KW_DEFADR_PCI_IO_SIZE (1024 * 64) + struct mbus_win { u32 base; u32 size; diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 630d6e6cc5ee..69141344c869 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -262,13 +262,13 @@ config PCIE_IPROC Say Y here if you want to enable Broadcom iProc PCIe controller, config PCI_MVEBU - bool "Enable Armada XP/38x PCIe driver" - depends on ARCH_MVEBU + bool "Enable Kirkwood / Armada 370/XP/375/38x PCIe driver" + depends on (ARCH_KIRKWOOD || ARCH_MVEBU) select MISC select DM_RESET help Say Y here if you want to enable PCIe controller support on - Armada XP/38x SoCs. + Kirkwood and Armada 370/XP/375/38x SoCs. config PCIE_DW_COMMON bool diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c index b3ea034a2847..d99a99bae940 100644 --- a/drivers/pci/pci_mvebu.c +++ b/drivers/pci/pci_mvebu.c @@ -498,6 +498,13 @@ static int mvebu_pcie_probe(struct udevice *dev) mvebu_pcie_set_local_bus_nr(pcie, 0); mvebu_pcie_set_local_dev_nr(pcie, 1); + /* + * Kirkwood arch code already maps mbus windows for PCIe IO and MEM. + * So skip calling mvebu_mbus_add_window_by_id() function as it would + * fail on error "conflicts with another window" which means conflict + * with existing PCIe window mappings. + */ +#ifndef CONFIG_ARCH_KIRKWOOD if (resource_size(&pcie->mem) && mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr, (phys_addr_t)pcie->mem.start, @@ -519,6 +526,7 @@ static int mvebu_pcie_probe(struct udevice *dev) pcie->io.start = 0; pcie->io.end = -1; } +#endif /* Setup windows and configure host bridge */ mvebu_pcie_setup_wins(pcie); @@ -725,10 +733,17 @@ static int mvebu_pcie_bind(struct udevice *parent) } ports_count = 0; +#ifdef CONFIG_ARCH_KIRKWOOD + mem.start = KW_DEFADR_PCI_MEM; + mem.end = KW_DEFADR_PCI_MEM + KW_DEFADR_PCI_MEM_SIZE - 1; + io.start = KW_DEFADR_PCI_IO; + io.end = KW_DEFADR_PCI_IO + KW_DEFADR_PCI_IO_SIZE - 1; +#else mem.start = MBUS_PCI_MEM_BASE; mem.end = MBUS_PCI_MEM_BASE + MBUS_PCI_MEM_SIZE - 1; io.start = MBUS_PCI_IO_BASE; io.end = MBUS_PCI_IO_BASE + MBUS_PCI_IO_SIZE - 1; +#endif /* First phase: Fill mvebu_pcie struct for each port */ ofnode_for_each_subnode(subnode, dev_ofnode(parent)) { @@ -809,6 +824,7 @@ static int mvebu_pcie_bind(struct udevice *parent) static const struct udevice_id mvebu_pcie_ids[] = { { .compatible = "marvell,armada-xp-pcie" }, { .compatible = "marvell,armada-370-pcie" }, + { .compatible = "marvell,kirkwood-pcie" }, { } }; -- 2.20.1