On Sat, Jan 01, 2022 at 11:42:45PM +0100, Heinrich Schuchardt wrote: > On 12/20/21 06:02, AKASHI Takahiro wrote: > > The existing options, "--fit" and "--raw," are only used to put a proper > > GUID in a capsule header, where GUID identifies a particular FMP (Firmware > > Management Protocol) driver which then would handle the firmware binary in > > a capsule. In fact, mkeficapsule does the exact same job in creating > > a capsule file whatever the firmware binary type is. > > > > To prepare for the future extension, the command syntax will be a bit > > modified to allow users to specify arbitrary GUID for their own FMP driver. > > OLD: > > [--fit <image> | --raw <image>] <capsule file> > > NEW: > > [--fit | --raw | --guid <guid-string>] <image> <capsule file> > > > > Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org> > > Reviewed-by: Simon Glass <s...@chromium.org> > > --- > > doc/develop/uefi/uefi.rst | 4 +- > > doc/mkeficapsule.1 | 26 +++++++++---- > > tools/Makefile | 1 + > > tools/mkeficapsule.c | 78 ++++++++++++++++++++++++++++++--------- > > 4 files changed, 82 insertions(+), 27 deletions(-) > > > > diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst > > index 864d61734bee..54fefd76f0f5 100644 > > --- a/doc/develop/uefi/uefi.rst > > +++ b/doc/develop/uefi/uefi.rst > > @@ -367,8 +367,8 @@ and used by the steps highlighted below. > > --private-key CRT.key \ > > --certificate CRT.crt \ > > --index 1 --instance 0 \ > > - [--fit <FIT image> | --raw <raw image>] \ > > - <capsule_file_name> > > + [--fit | --raw | --guid <guid-string] \ > > + <image_blob> <capsule_file_name> > > > > 4. Insert the signature list into a device tree in the following format:: > > > > diff --git a/doc/mkeficapsule.1 b/doc/mkeficapsule.1 > > index 837e09ab451e..312e8a8b3188 100644 > > --- a/doc/mkeficapsule.1 > > +++ b/doc/mkeficapsule.1 > > @@ -5,7 +5,7 @@ mkeficapsule \- Generate EFI capsule file for U-Boot > > > > .SH SYNOPSIS > > .B mkeficapsule > > -.RB [\fIoptions\fP] " \fIcapsule-file\fP" > > +.RB [\fIoptions\fP] " \fIimage-blob\fP \fIcapsule-file\fP" > > Don't use escape sequences.
We are discussing this issue in another thread. > > > > .SH "DESCRIPTION" > > The > > @@ -21,7 +21,7 @@ Optionally, a capsule file can be signed with a given > > private key. > > In this case, the update will be authenticated by verifying the signature > > before applying. > > > > -\fBmkeficapsule\fP supports two different format of image files: > > +\fBmkeficapsule\fP takes any type of image files, including: > > .TP > > .I raw image > > format is a single binary blob of any type of firmware. > > @@ -33,16 +33,28 @@ is the same as used in the new \fIuImage\fP format and > > allows for > > multiple binary blobs in a single capsule file. > > This type of image file can be generated by \fBmkimage\fP. > > > > +.PP > > +If you want to use other types than above two, you should explicitly > > +specify a guid for the FMP driver. > > + > > .SH "OPTIONS" > > -One of \fB--fit\fP or \fB--raw\fP option must be specified. > > +One of \fB--fit\fP, \fB--raw\fP or \fB--guid\fP option must be specified. > > > > .TP > > -.BI "-f, --fit \fIfit-image-file\fP" > > -Specify a FIT image file > > +.BI "-f, --fit > > +Indicate that the blob is a FIT image file > > > > .TP > > -.BI "-r, --raw \fIraw-image-file\fP" > > -Specify a raw image file > > +.BI "-r, --raw > > +Indicate that the blob is a raw image file > > + > > +.TP > > +.BI "-g, --guid \fIguid-string\fP" > > Don't use escape sequences. > > > +Specify guid for image blob type. The format is: > > + xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > > + > > +The first three elements are in little endian, while the rest > > +is in big endian. > > > > .TP > > .BI "-i, --index \fIindex\fP" > > diff --git a/tools/Makefile b/tools/Makefile > > index afca08e2941a..cbf83a252caa 100644 > > --- a/tools/Makefile > > +++ b/tools/Makefile > > @@ -242,6 +242,7 @@ ifeq ($(CONFIG_TOOLS_LIBCRYPTO),y) > > HOSTLDLIBS_mkeficapsule += \ > > $(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl > > -lcrypto") > > endif > > +HOSTLDLIBS_mkeficapsule += -luuid > > hostprogs-$(CONFIG_TOOLS_MKEFICAPSULE) += mkeficapsule > > > > # We build some files with extra pedantic flags to try to minimize things > > diff --git a/tools/mkeficapsule.c b/tools/mkeficapsule.c > > index 3e6f36430d74..8891496d1564 100644 > > --- a/tools/mkeficapsule.c > > +++ b/tools/mkeficapsule.c > > @@ -14,7 +14,7 @@ > > > > #include <sys/stat.h> > > #include <sys/types.h> > > - > > +#include <uuid/uuid.h> > > #include <linux/kconfig.h> > > #ifdef CONFIG_TOOLS_LIBCRYPTO > > #include <openssl/asn1.h> > > @@ -37,14 +37,15 @@ efi_guid_t efi_guid_image_type_uboot_raw = > > efi_guid_t efi_guid_cert_type_pkcs7 = EFI_CERT_TYPE_PKCS7_GUID; > > > > #ifdef CONFIG_TOOLS_LIBCRYPTO > > -static const char *opts_short = "f:r:i:I:v:p:c:m:dh"; > > +static const char *opts_short = "frg:i:I:v:p:c:m:dh"; > > #else > > -static const char *opts_short = "f:r:i:I:v:h"; > > +static const char *opts_short = "frg:i:I:v:h"; > > #endif > > > > static struct option options[] = { > > - {"fit", required_argument, NULL, 'f'}, > > - {"raw", required_argument, NULL, 'r'}, > > + {"fit", no_argument, NULL, 'f'}, > > + {"raw", no_argument, NULL, 'r'}, > > + {"guid", required_argument, NULL, 'g'}, > > {"index", required_argument, NULL, 'i'}, > > {"instance", required_argument, NULL, 'I'}, > > #ifdef CONFIG_TOOLS_LIBCRYPTO > > @@ -59,11 +60,12 @@ static struct option options[] = { > > > > static void print_usage(void) > > { > > - printf("Usage: %s [options] <output file>\n" > > + printf("Usage: %s [options] <image blob> <output file>\n" > > "Options:\n" > > > > - "\t-f, --fit <fit image> new FIT image file\n" > > - "\t-r, --raw <raw image> new raw image file\n" > > + "\t-f, --fit FIT image type\n" > > + "\t-r, --raw raw image type\n" > > + "\t-g, --guid <guid string> guid for image blob type\n" > > "\t-i, --index <index> update image index\n" > > "\t-I, --instance <instance> update hardware instance\n" > > #ifdef CONFIG_TOOLS_LIBCRYPTO > > @@ -563,6 +565,37 @@ err: > > return ret; > > } > > > > +/** > > + * convert_uuid_to_guid() - convert uuid string to guid string > > + * @buf: String for UUID > > This isn't a string (like "00000000-0000-0000-0000-000000000000") but a > u8[16]. OK, I will use "binary" if appropriate. -Takahiro Akashi > Best regards > > Heinrich > > > + * > > + * UUID and GUID have the same data structure, but their string > > + * formats are different due to the endianness. See lib/uuid.c. > > + * Since uuid_parse() can handle only UUID, this function must > > + * be called to get correct data for GUID when parsing a string. > > + * > > + * The correct data will be returned in @buf. > > + */ > > +void convert_uuid_to_guid(unsigned char *buf) > > +{ > > + unsigned char c; > > + > > + c = buf[0]; > > + buf[0] = buf[3]; > > + buf[3] = c; > > + c = buf[1]; > > + buf[1] = buf[2]; > > + buf[2] = c; > > + > > + c = buf[4]; > > + buf[4] = buf[5]; > > + buf[5] = c; > > + > > + c = buf[6]; > > + buf[6] = buf[7]; > > + buf[7] = c; > > +} > > + > > /** > > * main - main entry function of mkeficapsule > > * @argc: Number of arguments > > @@ -577,14 +610,13 @@ err: > > */ > > int main(int argc, char **argv) > > { > > - char *file; > > efi_guid_t *guid; > > + unsigned char uuid_buf[16]; > > unsigned long index, instance; > > uint64_t mcount; > > char *privkey_file, *cert_file; > > int c, idx; > > > > - file = NULL; > > guid = NULL; > > index = 0; > > instance = 0; > > @@ -599,21 +631,31 @@ int main(int argc, char **argv) > > > > switch (c) { > > case 'f': > > - if (file) { > > - printf("Image already specified\n"); > > + if (guid) { > > + printf("Image type already specified\n"); > > exit(EXIT_FAILURE); > > } > > - file = optarg; > > guid = &efi_guid_image_type_uboot_fit; > > break; > > case 'r': > > - if (file) { > > - printf("Image already specified\n"); > > + if (guid) { > > + printf("Image type already specified\n"); > > exit(EXIT_FAILURE); > > } > > - file = optarg; > > guid = &efi_guid_image_type_uboot_raw; > > break; > > + case 'g': > > + if (guid) { > > + printf("Image type already specified\n"); > > + exit(EXIT_FAILURE); > > + } > > + if (uuid_parse(optarg, uuid_buf)) { > > + printf("Wrong guid format\n"); > > + exit(EXIT_FAILURE); > > + } > > + convert_uuid_to_guid(uuid_buf); > > + guid = (efi_guid_t *)uuid_buf; > > + break; > > case 'i': > > index = strtoul(optarg, NULL, 0); > > break; > > @@ -649,14 +691,14 @@ int main(int argc, char **argv) > > } > > > > /* check necessary parameters */ > > - if ((argc != optind + 1) || !file || > > + if ((argc != optind + 2) || !guid || > > ((privkey_file && !cert_file) || > > (!privkey_file && cert_file))) { > > print_usage(); > > exit(EXIT_FAILURE); > > } > > > > - if (create_fwbin(argv[optind], file, guid, index, instance, > > + if (create_fwbin(argv[argc - 1], argv[argc - 2], guid, index, instance, > > mcount, privkey_file, cert_file) < 0) { > > printf("Creating firmware capsule failed\n"); > > exit(EXIT_FAILURE); >