Add Nuvoton BMC NPCM7xx/NPCM8xx uart driver
Signed-off-by: Stanley Chu <ys...@nuvoton.com>
---
drivers/serial/Kconfig | 7 ++
drivers/serial/Makefile | 1 +
drivers/serial/serial_npcm.c | 151 +++++++++++++++++++++++++++++++++++
3 files changed, 159 insertions(+)
create mode 100644 drivers/serial/serial_npcm.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6c8fdda9a0..8daaef61b3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -920,6 +920,13 @@ config MPC8XX_CONS
depends on MPC8xx
default y
+config NPCM_SERIAL
+ bool "UART driver for Nuvoton NPCM BMC"
+ depends on DM_SERIAL
+ help
+ Select this to enable UART support for Nuvoton BMCs
+ (NPCM7xx and NPCM8xx)
+
config XEN_SERIAL
bool "XEN serial support"
depends on XEN
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 8168af640f..866495e416 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_OWL_SERIAL) += serial_owl.o
obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
obj-$(CONFIG_MTK_SERIAL) += serial_mtk.o
obj-$(CONFIG_MT7620_SERIAL) += serial_mt7620.o
+obj-$(CONFIG_NPCM_SERIAL) += serial_npcm.o
obj-$(CONFIG_SIFIVE_SERIAL) += serial_sifive.o
obj-$(CONFIG_XEN_SERIAL) += serial_xen.o
diff --git a/drivers/serial/serial_npcm.c b/drivers/serial/serial_npcm.c
new file mode 100644
index 0000000000..67343e5805
--- /dev/null
+++ b/drivers/serial/serial_npcm.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology Corp.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <serial.h>
+
+struct npcm_uart {
+ union {
+ u32 rbr;
+ u32 thr;
+ u32 dll;
+ };
+ union {
+ u32 ier;
+ u32 dlm;
+ };
+ union {
+ u32 iir;
+ u32 fcr;
+ };
+ u32 lcr;
+ u32 mcr;
+ u32 lsr;
+ u32 msr;
+ u32 tor;
+};
+
+#define LCR_WLS_8BITS 3
+#define FCR_TFR BIT(2)
+#define FCR_RFR BIT(1)
+#define FCR_FME BIT(0)
+#define LSR_THRE BIT(5)
+#define LSR_RFDR BIT(0)
+#define LCR_DLAB BIT(7)
+
+struct npcm_serial_plat {
+ struct npcm_uart *reg;
+ u32 uart_clk;
+};
+
+static int npcm_serial_pending(struct udevice *dev, bool input)
+{
+ struct npcm_serial_plat *plat = dev_get_plat(dev);
+ struct npcm_uart *uart = plat->reg;
+
+ if (input)
+ return (readb(&uart->lsr) & LSR_RFDR);
+ else
+ return !(readb(&uart->lsr) & LSR_THRE);
+}
+
+static int npcm_serial_putc(struct udevice *dev, const char ch)
+{
+ struct npcm_serial_plat *plat = dev_get_plat(dev);
+ struct npcm_uart *uart = plat->reg;
+
+ while (!(readb(&uart->lsr) & LSR_THRE))
+ ;
+
+ writeb(ch, &uart->thr);
+
+ return 0;
+}
+
+static int npcm_serial_getc(struct udevice *dev)
+{
+ struct npcm_serial_plat *plat = dev_get_plat(dev);
+ struct npcm_uart *uart = plat->reg;
+
+ while (!(readb(&uart->lsr) & LSR_RFDR))
+ ;
+
+ return readb(&uart->rbr);
+}
+
+static int npcm_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct npcm_serial_plat *plat = dev_get_plat(dev);
+ struct npcm_uart *uart = plat->reg;
+ u16 divisor;
+
+ /* BaudOut = UART Clock / (16 * [Divisor + 2]) */
+ divisor = DIV_ROUND_CLOSEST(plat->uart_clk, 16 * baudrate + 2) - 2;
+
+ setbits_8(&uart->lcr, LCR_DLAB);
+ writeb(divisor & 0xff, &uart->dll);
+ writeb(divisor >> 8, &uart->dlm);
+ clrbits_8(&uart->lcr, LCR_DLAB);
+
+ return 0;
+}
+
+static int npcm_serial_probe(struct udevice *dev)
+{
+ struct npcm_serial_plat *plat = dev_get_plat(dev);
+ struct npcm_uart *uart = plat->reg;
+ struct clk clk;
+ u32 freq;
+ int ret;
+
+ plat->reg = dev_read_addr_ptr(dev);
+ freq = dev_read_u32_default(dev, "clock-frequency", 0);
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret < 0) {
+ printf("Cannot get clk for uart\n");
+ return ret;
+ }
+ ret = clk_set_rate(&clk, freq);
+ if (ret < 0)
+ return ret;
+ plat->uart_clk = ret;
+
+ /* Disable all interrupt */
+ writeb(0, &uart->ier);
+
+ /* Set 8 bit, 1 stop, no parity */
+ writeb(LCR_WLS_8BITS, &uart->lcr);
+
+ /* Reset RX/TX FIFO */
+ writeb(FCR_FME | FCR_RFR | FCR_TFR, &uart->fcr);
+
+ return 0;
+}
+
+static const struct dm_serial_ops npcm_serial_ops = {
+ .getc = npcm_serial_getc,
+ .setbrg = npcm_serial_setbrg,
+ .putc = npcm_serial_putc,
+ .pending = npcm_serial_pending,
+};
+
+static const struct udevice_id npcm_serial_ids[] = {
+ { .compatible = "nuvoton,npcm750-uart" },
+ { .compatible = "nuvoton,npcm845-uart" },
+ { }
+};
+
+U_BOOT_DRIVER(serial_npcm) = {
+ .name = "serial_npcm",
+ .id = UCLASS_SERIAL,
+ .of_match = npcm_serial_ids,
+ .plat_auto = sizeof(struct npcm_serial_plat),
+ .probe = npcm_serial_probe,
+ .ops = &npcm_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
--
2.17.1
