On 1/14/22 14:31, Pali Rohár wrote:
Hello Stefan,
this is v4 of series that adds more checks for kwbimage validity and
consistency to SPL, mainly checking image data checksum.
Patches now passed Github CI testing:
https://github.com/u-boot/u-boot/pull/106
Changes since v3:
- fix compile erros detected by CI (patch 2)
- print addresses in hex format instead of dec format (patch 1,3,6)
- rebase on master branch as v3 does not apply (patch 8)
Changes since v2:
- changed the error message in patch 6 according to Pali's suggestion
- added R-B tags
Changes since v1:
- updated error messages as requested by Stefan
- fixed checkpatch warnings for uintN_t types (converted to preferred
uN)
- added more checkpatch fixes
Applied to u-boot-marvell/master
Thanks,
Stefan
Marek Behún (4):
arm: mvebu: spl: Print srcaddr in error message
arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t
arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible
arm: mvebu: spl: Fix 100 column exceeds
Pali Rohár (5):
arm: mvebu: Check that kwbimage offset and blocksize are valid
SPL: Add struct spl_boot_device parameter into
spl_parse_board_header()
arm: mvebu: Check that kwbimage blockid matches boot mode
SPL: Add support for checking board / BootROM specific image types
arm: mvebu: Check for kwbimage data checksum
arch/arm/mach-mvebu/spl.c | 133 +++++++++++++++++++---------
arch/arm/mach-sunxi/spl_spi_sunxi.c | 2 +-
common/spl/spl.c | 13 ++-
common/spl/spl_ext.c | 9 +-
common/spl/spl_fat.c | 11 ++-
common/spl/spl_legacy.c | 3 +-
common/spl/spl_mmc.c | 43 +++++----
common/spl/spl_nand.c | 13 +--
common/spl/spl_net.c | 2 +-
common/spl/spl_nor.c | 4 +-
common/spl/spl_onenand.c | 2 +-
common/spl/spl_ram.c | 2 +-
common/spl/spl_sata.c | 9 +-
common/spl/spl_sdp.c | 2 +-
common/spl/spl_spi.c | 9 +-
common/spl/spl_ubi.c | 4 +-
common/spl/spl_usb.c | 4 +-
common/spl/spl_xip.c | 4 +-
common/spl/spl_ymodem.c | 4 +-
drivers/usb/gadget/f_sdp.c | 13 +--
include/sdp.h | 3 +-
include/spl.h | 7 ++
22 files changed, 196 insertions(+), 100 deletions(-)
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de