Hi Marek On 12/6/21 21:58, Marek Vasut wrote: > In case the SoC reports the boot device type is USB, it means the SPL was > loaded via BootROM DFU mode. Currently the spl_boot_device() returns boot > device as USB host, change it to DFU instead, so the SPL can continue the > DFU boot and load U-Boot via DFU. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Patrice Chotard <patrice.chot...@foss.st.com> > Cc: Patrick Delaunay <patrick.delau...@foss.st.com> > --- > arch/arm/mach-stm32mp/spl.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c > index 405eff68a3b..51fe0698fab 100644 > --- a/arch/arm/mach-stm32mp/spl.c > +++ b/arch/arm/mach-stm32mp/spl.c > @@ -43,7 +43,7 @@ u32 spl_boot_device(void) > case BOOT_SERIAL_UART_8: > return BOOT_DEVICE_UART; > case BOOT_SERIAL_USB_OTG: > - return BOOT_DEVICE_USB; > + return BOOT_DEVICE_DFU; > case BOOT_FLASH_NAND_FMC: > return BOOT_DEVICE_NAND; > case BOOT_FLASH_NOR_QSPI:
Applied to u-boot-stm/master Thanks Patrice