On 12/01/22, Oliver Graute wrote: > Switch to use binman to pack images > > Signed-off-by: Oliver Graute <oliver.gra...@kococonnector.com> > --- > > A flash.bin is now generated by binman but its now bigger then with > mkimage_fit_atf.sh 800K vs. 1.1M and is currently NOT booting. > So something is still messed up. > > arch/arm/dts/imx8qm-rom7720-a1.dts | 1 + > arch/arm/dts/imx8qm-u-boot.dtsi | 136 ++++++++++++++++++ > arch/arm/mach-imx/imx8/Kconfig | 1 + > .../advantech/imx8qm_rom7720_a1/imximage.cfg | 16 +-- > configs/imx8qm_rom7720_a1_4G_defconfig | 2 +- > doc/board/advantech/imx8qm-rom7720-a1.rst | 3 +- > 6 files changed, 142 insertions(+), 17 deletions(-) > create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi > > diff --git a/arch/arm/dts/imx8qm-rom7720-a1.dts > b/arch/arm/dts/imx8qm-rom7720-a1.dts > index d1f2fff869..332d441c6d 100644 > --- a/arch/arm/dts/imx8qm-rom7720-a1.dts > +++ b/arch/arm/dts/imx8qm-rom7720-a1.dts > @@ -10,6 +10,7 @@ > /memreserve/ 0x80000000 0x00020000; > > #include "fsl-imx8qm.dtsi" > +#include "imx8qm-u-boot.dtsi" > > / { > model = "Advantech iMX8QM Qseven series"; > diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi > new file mode 100644 > index 0000000000..98379516cc > --- /dev/null > +++ b/arch/arm/dts/imx8qm-u-boot.dtsi > @@ -0,0 +1,136 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2021 NXP > + */ > + > +/ { > + binman: binman { > + multiple-images; > + }; > +}; > + > +&binman { > + u-boot { > + align-size = <4>; > + align = <4>; > + filename = "u-boot.bin"; > + pad-byte = <0xff>; > + > + u-boot-spl { > + align-end = <4>; > + }; > + }; > + > + spl { > + filename = "spl.bin"; > + mkimage { > + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e > 0x100000";
this refers to the wrong container format for imx8qm! So replacing s/imx8mimage/imx8image/ does help to get a working image. > > #define __ASSEMBLY__ > > -/* Boot from SD, sector size 0x400 */ > -BOOT_FROM SD 0x400 > -/* SoC type IMX8QM */ > -SOC_TYPE IMX8QM > -/* Append seco container image */ > -APPEND mx8qm-ahab-container.img > -/* Create the 2nd container */ > -CONTAINER > -/* Add scfw image with exec attribute */ > -IMAGE SCU mx8qm-val-scfw-tcm.bin > -/* Add ATF image with exec attribute */ > -IMAGE A35 bl31.bin 0x80000000 > -/* Add U-Boot image with load attribute */ > -DATA A35 u-boot-dtb.bin 0x80020000 I need to keep this here to. > +BOOT_FROM sd > +LOADER u-boot-dtb.bin 0x10000 with this changes the resulting flash.bin is as big as before and its booting flawlessly. I 'll ppst later a patch v1 for this. Best regards, Oliver