2010/11/24 wzc0066 <wzc0...@gmail.com> > The env set as below: > > bootcmd=run flashboot > flashboot=sf probe 1; sf read 0x1000000 0x30000 0x320000; bootm 0x1000000 > > After enter the uboot console, uClinux can be started by command "boot"; > but after power on (reset) the board, the error info is: > * > * > *SF: Detected M25P32 with page size 256, total 4 MiB* > *4096 KiB M25P32 at 0:1 is now current device* > *Wrong Image Format for bootm command* > *ERROR: can't get kernel image!* > > So how to setup to make sure uClinux could be auto started after power on ? > > The 'boot' command will run the 'bootcmd', read kernel image to memory then start it.
If 'bootm' can works well, it need to copy kernel image to memory first, too. but actuality it's not, so is there a way to print out the exactly string which 'bootm' have executed ? > -- > wzc0066 > -- wzc0066
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
