On 1/31/22 08:20, Ovidiu Panait wrote:
There are no boards that define CONFIG_SYS_RESET_ADDR, so drop the
remaining comments referencing it and also the config_whitelist.txt entry.
Signed-off-by: Ovidiu Panait <ovidiu.pan...@windriver.com>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
include/configs/10m50_devboard.h | 9 ---------
include/configs/3c120_devboard.h | 9 ---------
scripts/config_whitelist.txt | 1 -
3 files changed, 19 deletions(-)
diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h
index 04ce88c9dd..3b4d1fd626 100644
--- a/include/configs/10m50_devboard.h
+++ b/include/configs/10m50_devboard.h
@@ -47,13 +47,4 @@
CONFIG_SYS_SDRAM_SIZE - \
CONFIG_SYS_MONITOR_LEN)
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-
-
#endif /* __CONFIG_H */
diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h
index e12e54fe4f..763cb8db7c 100644
--- a/include/configs/3c120_devboard.h
+++ b/include/configs/3c120_devboard.h
@@ -47,13 +47,4 @@
CONFIG_SYS_SDRAM_SIZE - \
CONFIG_SYS_MONITOR_LEN)
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-
-
#endif /* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 84e46e3763..4bd298694a 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1836,7 +1836,6 @@ CONFIG_SYS_RCAR_I2C0_BASE
CONFIG_SYS_RCAR_I2C1_BASE
CONFIG_SYS_RCAR_I2C2_BASE
CONFIG_SYS_RCAR_I2C3_BASE
-CONFIG_SYS_RESET_ADDR
CONFIG_SYS_RFD
CONFIG_SYS_RGMII1_PHY_ADDR
CONFIG_SYS_RGMII2_PHY_ADDR
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
