> Add support of secondary boot address for imx8mn. The secondary > boot address is hardcoded in the fuse. The value is calculated > from there according to the following description: > The fuse IMG_CNTN_SET1_OFFSET (0x490[22:19]) is defined as follows: > - Secondary boot is disabled if fuse value is bigger than 10, n = fuse > value bigger than 10. > - n == 0: Offset = 4MB > - n == 2: Offset = 1MB > - Others & n <= 10 : Offset = 1MB*2^n > - For FlexSPI boot, the valid values are: 0, 1, 2, 3, 4, 5, 6, and 7. > Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================
