From: Marek Behún <marek.be...@nic.cz>
In commit 3fc92a215b69 ("ddr: marvell: a38x: fix SPLIT_OUT_MIX state
decision") I ported a cleaned up and changed version of patch
mv_ddr: a380: fix SPLIT_OUT_MIX state decision
In the port we removed checking for BYTE_HOMOGENEOUS_SPLIT_OUT bit,
because:
- the fix seemed to work without it
- the bit was checked for only at one place out of two, while the second
bit, BYTE_SPLIT_OUT_MIX, was checked for in both cases
- without the removal it didn't work on Allied Telesis' x530 board
We recently had a chance to test on more boards, and it seems that the
change needs to be opposite: instead of removing the check for
BYTE_HOMOGENEOUS_SPLIT_OUT from the first if() statement, the check
needs to be added also to the second one - it needs to be at both
places.
With this change all the Turris Omnia boards I have had available to
test seem to work, I didn't encounter not even one failed DDR training.
As last time, I am noting that I do not understand what this code is
actually doing, I haven't studied the DDR training algorithm and
I suspect that no one will be able to explain it to U-Boot contributors,
so we are left with this blind poking in the code with testing whether
it works on several boards and hoping it doesn't break anything for
anyone :-(.
Signed-off-by: Marek Behún <marek.be...@nic.cz>
---
drivers/ddr/marvell/a38x/ddr3_training_centralization.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
index 42308b6965..be9f985f22 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
@@ -180,7 +180,8 @@ static int ddr3_tip_centralization(u32 dev_num, u32 mode)
[bit_id],
EDGE_1);
if (current_byte_status &
- BYTE_SPLIT_OUT_MIX) {
+ (BYTE_SPLIT_OUT_MIX |
+ BYTE_HOMOGENEOUS_SPLIT_OUT)) {
if (cur_start_win[bit_id] >= 64)
cur_start_win[bit_id]
-= 64;
else
@@ -197,7 +198,8 @@ static int ddr3_tip_centralization(u32 dev_num, u32 mode)
EDGE_1);
if (cur_end_win[bit_id] >= 64 &&
(current_byte_status &
- BYTE_SPLIT_OUT_MIX)) {
+ (BYTE_SPLIT_OUT_MIX |
+ BYTE_HOMOGENEOUS_SPLIT_OUT))) {
cur_end_win[bit_id] -= 64;
DEBUG_CENTRALIZATION_ENGINE
(DEBUG_LEVEL_INFO,
--
2.34.1
