Dear Andy & Kumar, a number of boards define RESET_VECTOR_ADDRESS in their config.mk files:
board/freescale/corenet_ds/config.mk board/freescale/mpc8536ds/config.mk board/freescale/mpc8572ds/config.mk board/freescale/p1022ds/config.mk board/freescale/p1_p2_rdb/config.mk board/freescale/p2020ds/config.mk The only place where RESET_VECTOR_ADDRESS ever gets used is in the respective u-boot.lds linker script. Do you see any reason why we should not move these RESET_VECTOR_ADDRESS settings into the board config files? The linker script just needs to include "config.h", and we could remove all the config.mk files above. What do you think? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Never call a man a fool. Borrow from him. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot