From: Rafał Miłecki <ra...@milecki.pl> UBI is often used on embedded devices to store UBI volumes with device configuration / calibration data. Such volumes may need to be documented and referenced for proper boot & setup.
Some examples: 1. U-Boot environment variables 2. Device calibration data 3. Default setup (e.g. initial password) Signed-off-by: Rafał Miłecki <ra...@milecki.pl> --- .../bindings/mtd/partitions/ubi.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/ubi.yaml diff --git a/Documentation/devicetree/bindings/mtd/partitions/ubi.yaml b/Documentation/devicetree/bindings/mtd/partitions/ubi.yaml new file mode 100644 index 000000000000..cd081f06d4cb --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/ubi.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/ubi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UBI (Unsorted Block Images) device + +description: | + UBI is a layer providing logical volumes (consisting of logical blocks) on top + of raw flash devices. It deals with low-level flash issues (bit-flips, bad + physical eraseblocks, wearing) providing a reliable data storage. + + UBI device is built and stored in a single flash partition. + + Some (usually embedded) devices use UBI volumes of specific names or indexes + to store setup / configuration data. This binding allows describing such + volumes so they can be identified and referenced by consumers. + +maintainers: + - Rafał Miłecki <ra...@milecki.pl> + +allOf: + - $ref: partition.yaml# + +properties: + compatible: + const: ubi + +patternProperties: + "^volume-[0-9a-f]+$": + type: object + description: UBI volume + properties: + volume-name: + $ref: /schemas/types.yaml#/definitions/string + volume-id: + $ref: /schemas/types.yaml#/definitions/uint32 + anyOf: + - required: + - volume-name + - required: + - volume-id + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "ubi"; + reg = <0x0000000 0x1000000>; + label = "filesystem"; + + env: volume-0 { + volume-name = "u-boot-env"; + }; + + calibration: volume-1 { + volume-id = <99>; + }; + }; + }; -- 2.34.1