On Sat, Feb 26, 2022 at 10:13 AM Adam Ford <aford...@gmail.com> wrote:
> The ethernet controller is DM compliant, and the device tree > defines it. There is no need to manually handle pulling > the ethernet out of reset. > > Signed-off-by: Adam Ford <aford...@gmail.com> > > diff --git a/board/logicpd/am3517evm/am3517evm.c > b/board/logicpd/am3517evm/am3517evm.c > index f014165928..e787441c74 100644 > --- a/board/logicpd/am3517evm/am3517evm.c > +++ b/board/logicpd/am3517evm/am3517evm.c > @@ -117,17 +117,10 @@ static void am3517_evm_musb_init(void) > */ > int misc_init_r(void) > { > - u32 reset; > - > omap_die_id_display(); > > am3517_evm_musb_init(); > > - /* ensure that the Ethernet module is out of reset */ > - reset = readl(AM3517_IP_SW_RESET); > - reset &= (~CPGMACSS_SW_RST); > - writel(reset, AM3517_IP_SW_RESET); > - > return 0; > } > > @@ -142,7 +135,6 @@ void set_muxconf_regs(void) > MUX_AM3517EVM(); > } > > - > #if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) > int board_eth_init(struct bd_info *bis) > { > -- > 2.34.1 > > Ethernet continues to work on AM3517 Zoom eXperimenter. Tested-by: Derald D. Woods <woods.techni...@gmail.com>