r8 is used for gd and should therefore be left alone
Signed-off-by: Andreas Bießmann <andreas.de...@googlemail.com>
---
I don't know if this is really needed, but we use --fixed-r8 compiler
flag for all arm boards. Albert, can you shed some light on that?
arch/arm/cpu/arm920t/start.S | 21 ++++++++++-----------
1 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 71de373..629be3f 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -201,7 +201,6 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
@@ -226,7 +225,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -237,10 +236,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH!
*/
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -253,10 +252,10 @@ fixabs:
b fixnext
fixrel:
/* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
+ ldr r1, [r0] /* r1 <- address of symbol */
+ add r1, r1, r9 /* r1 <- relocated address of symbol */
fixnext:
- str r1, [r0]
+ str r1, [r0] /* store back content of r1 */
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
@@ -267,7 +266,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -295,10 +294,10 @@ _nand_boot_ofs:
ldr r0, _board_init_r_ofs
adr r1, _start
add lr, r0, r1
- add lr, lr, r9
+ add lr, lr, r9 /* position from board_init_r in RAM */
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
--
1.7.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
