Le Fri, 4 Mar 2022 14:31:08 +0000, <eugen.hris...@microchip.com> a écrit :
> On 3/4/22 1:05 PM, Clément Léger wrote: > > Add the device-tree node to describe the TCB timer. > > > > Signed-off-by: Clément Léger <clement.le...@bootlin.com> > > --- > > arch/arm/dts/sama5d2.dtsi | 17 +++++++++++++++++ > > 1 file changed, 17 insertions(+) > > > > diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi > > index dee68dc022..9360c0008c 100644 > > --- a/arch/arm/dts/sama5d2.dtsi > > +++ b/arch/arm/dts/sama5d2.dtsi > > @@ -1,4 +1,5 @@ > > #include "skeleton.dtsi" > > +#include <dt-bindings/interrupt-controller/irq.h> > > > > / { > > model = "Atmel SAMA5D2 family SoC"; > > @@ -710,6 +711,22 @@ > > status = "disabled"; > > }; > > > > + tcb0: timer@f800c000 { > > + compatible = "atmel,sama5d2-tcb", > > "simple-mfd", > > + "syscon"; > > No need to line break the previous line. DT files can have more than 80 > chars per line, it's fine. Ok, wasn't sure of that, found some of them that had these line breaks. Good to know for next patches. > > If there are no other comments I will fix this when applying, no need to > send a v6 for now. Ok, thanks Eugen. > > > + reg = <0xf800c000 0x100>; > > + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; > > + clocks = <&tcb0_clk>, <&tcb0_gclk>, > > <&clk32k>; > > + clock-names = "t0_clk", "gclk", "slow_clk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + timer0: timer@0 { > > + compatible = "atmel,tcb-timer"; > > + reg = <0>, <1>; > > + }; > > + }; > > + > > watchdog@f8048040 { > > compatible = "atmel,sama5d4-wdt"; > > reg = <0xf8048040 0x10>; > > -- > > 2.34.1 > > > -- Clément Léger, Embedded Linux and Kernel engineer at Bootlin https://bootlin.com