Add the required binman images to replace the Makefile rules which are
currently used. This includes subsuming:
- tpl/u-boot-tpl-rockchip.bin if TPL is enabled
- idbloader.img if either or both of SPL and TPL are enabled
- u-boot.itb if SPL_FIT is enabled
- u-boot-rockchip.bin if SPL is used, either using u-boot.itb when
SPL_FIT is enabled or u-boot.img when it isn't
Note that the intermediate files are dropped with binman, since it
producing everything in one pass. This means that
tpl/u-boot-tpl-rockchip.bin is not created, for example.
Note that for some 32-bit rk3288 boards, rockchip-optee.dtsi is included.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3:
- Add an offset to the FIT description
Changes in v2:
- Rename op-tee to tee-os
- Drop use of .itb2
arch/arm/dts/rockchip-u-boot.dtsi | 85 ++++++++++++++++++++++++++++++-
1 file changed, 83 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi
b/arch/arm/dts/rockchip-u-boot.dtsi
index eae3ee715d..ff64ee2013 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -17,13 +17,94 @@
filename = "u-boot-rockchip.bin";
pad-byte = <0xff>;
- blob {
- filename = "idbloader.img";
+#ifdef CONFIG_TPL
+ mkimage {
+ args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
+
+ u-boot-tpl {
+ };
+ };
+
+ u-boot-spl {
};
+#elif defined(CONFIG_SPL) /* SPL only */
+ mkimage {
+ args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
+
+ u-boot-spl {
+ };
+ };
+#endif
+#if defined(CONFIG_SPL_FIT) && defined(CONFIG_ARM64)
+ fit: fit {
+ description = "FIT image for U-Boot with bl31 (TF-A)";
+ #address-cells = <1>;
+ fit,fdt-list = "of-list";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ offset = <CONFIG_SPL_PAD_TO>;
+ images {
+ u-boot {
+ description = "U-Boot (64-bit)";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ u-boot-nodtb {
+ };
+ };
+
+ @atf-SEQ {
+ fit,operation = "split-elf";
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ os = "arm-trusted-firmware";
+ compression = "none";
+ fit,load;
+ fit,entry;
+ fit,data;
+
+ atf-bl31 {
+ };
+ };
+ @tee-SEQ {
+ fit,operation = "split-elf";
+ description = "TEE";
+ type = "tee";
+ arch = "arm64";
+ os = "tee";
+ compression = "none";
+ fit,load;
+ fit,entry;
+ fit,data;
+ tee-os {
+ };
+ };
+
+ @fdt-SEQ {
+ description = "fdt-NAME";
+ compression = "none";
+ type = "flat_dt";
+ };
+ };
+
+ configurations {
+ default = "@config-DEFAULT-SEQ";
+ @config-SEQ {
+ description = "NAME.dtb";
+ fdt = "fdt-SEQ";
+ firmware = "u-boot";
+ fit,loadables;
+ };
+ };
+ };
+#else
u-boot-img {
offset = <CONFIG_SPL_PAD_TO>;
};
+#endif /* CONFIG_ARM64 */
};
};
#endif
--
2.35.1.616.g0bdcbb4464-goog
