st 23. 2. 2022 v 16:17 odesÃlatel Michal Simek <michal.si...@xilinx.com> napsal: > > Hi, > > kv-g boards have been moved to new model where u-boot configures a lot of > things at run time which requires updates in DTs especially in connection > to enabling clocks for these platforms. > There are also small adjustment to match the latest state. > > Thanks, > Michal > > > Michal Simek (6): > arm64: zynqmp: Move usb hub from i2c to usb node > arm64: zynqmp: Setup clock for DP and DPDMA > arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM > arm64: zynqmp: Switch to ethernet-phy-id in kv260 > arm64: zynqmp: Enable DP driver for SOMs > arm64: zynqmp: Fix level of gpio reset for usb on kv260 boards > > arch/arm/dts/zynqmp-clk-ccf.dtsi | 8 ++++++++ > arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 12 +++++++++--- > arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 26 ++++++++++++++++++-------- > arch/arm/dts/zynqmp-sm-k26-revA.dts | 5 +++++ > 4 files changed, 40 insertions(+), 11 deletions(-) > > -- > 2.35.1 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
