> -----Original Message----- > From: u-boot-boun...@lists.denx.de > [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Alexander Holler > Sent: Tuesday, November 30, 2010 9:59 PM > To: u-boot@lists.denx.de > Subject: [U-Boot] OMAP3: relocation and bss usage (timer, gpmc, ...) > > Hello, > > browsing through some code searching for a reason why an > u-boot compiled > with gcc 4.5.1 fails to boot on a beagleboard, I've come > through another > place where bss is used before relocation: gpmc_init (gpmc_cfg) in > arch/arm/cpu/armv7/omap3/mem.c. > > I haven't fixed it up to now, but I want to inform the people > actually > working with that board (currently I don't have any to do with that > board and just touching at from time to time for fun), that > there might > be other places than the already mentioned timer_init() and that > gpmc_init(). > > All candidates for such problems could be found in board_init_f() in > arch/arm/lib/board.c, escpecially all functions which appear in > init_sequence in board.c.
For omap3evm - I was getting multiple errors during compilation. Most for undefined symbols - which existed in the compiled objects but, I suspect, not in right sequence. Haven't still been able to look back at these errors; still surprised to find that you had the code running on beagle. ~sanjeev > > Someone should take the time and check them all. ;) > > Regards, > > Alexander > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot