On 3/7/22 19:03, Pali Rohár wrote:
The Globalscale Technologies Sheevaplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network.
And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/sheevaplug/sheevaplug.h, use BIT macro, and add/cleanup
comments.
Signed-off-by: Tony Dinh <mibo...@gmail.com>
Applied to u-boot-marvell/master
Thanks,
Stefan
---
board/Marvell/sheevaplug/sheevaplug.c | 83 +++++----------------------
board/Marvell/sheevaplug/sheevaplug.h | 24 --------
configs/sheevaplug_defconfig | 1 +
include/configs/sheevaplug.h | 17 +++---
4 files changed, 22 insertions(+), 103 deletions(-)
delete mode 100644 board/Marvell/sheevaplug/sheevaplug.h
diff --git a/board/Marvell/sheevaplug/sheevaplug.c
b/board/Marvell/sheevaplug/sheev
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
