On 3/17/22 08:39, Tommaso Merciai wrote:
On Wed, Mar 16, 2022 at 09:54:34PM +0100, Marek Vasut wrote:
On 3/16/22 16:27, Tommaso Merciai wrote:
Add function enable_pwm_clk into in clock_imx8mm.c. This
function first configure, then enable pwm clock from clock control
register. The following configuration is used:
source(0) -> 24 MHz ref clock
div(0) -> no division for this clock
References:
- iMX8MMRM.pdf p 303
Signed-off-by: Tommaso Merciai <tommaso.merc...@amarulasolutions.com>
---
Changes since v1:
- Fix enable_pwm_clk function implementation. Now is generic for all pwm
clks
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 53 ++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
Why is this not in drivers/clk/imx/ DM driver ?
Hi Marek,
All function that enable/configure clk from CCGR are in
arch/arm/mach-imx/imx8m/clock_imx8mm.c.
These seems to be CCGR:
$ grep -C 2 '0x4[0-9a-f]\{3\}' drivers/clk/imx/clk-imx8mm.c | sed "s@^.@@"
clk_dm(IMX8MM_CLK_ECSPI1_ROOT,
imx_clk_gate4("ecspi1_root_clk", "ecspi1", base + 0x4070, 0));
clk_dm(IMX8MM_CLK_ECSPI2_ROOT,
imx_clk_gate4("ecspi2_root_clk", "ecspi2", base + 0x4080, 0));
clk_dm(IMX8MM_CLK_ECSPI3_ROOT,
imx_clk_gate4("ecspi3_root_clk", "ecspi3", base + 0x4090, 0));
clk_dm(IMX8MM_CLK_I2C1_ROOT,
imx_clk_gate4("i2c1_root_clk", "i2c1", base + 0x4170, 0));
clk_dm(IMX8MM_CLK_I2C2_ROOT,
imx_clk_gate4("i2c2_root_clk", "i2c2", base + 0x4180, 0));
clk_dm(IMX8MM_CLK_I2C3_ROOT,
imx_clk_gate4("i2c3_root_clk", "i2c3", base + 0x4190, 0));
clk_dm(IMX8MM_CLK_I2C4_ROOT,
imx_clk_gate4("i2c4_root_clk", "i2c4", base + 0x41a0, 0));
clk_dm(IMX8MM_CLK_OCOTP_ROOT,
imx_clk_gate4("ocotp_root_clk", "ipg_root", base + 0x4220, 0));
clk_dm(IMX8MM_CLK_USDHC1_ROOT,
imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0));
clk_dm(IMX8MM_CLK_USDHC2_ROOT,
imx_clk_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0));
clk_dm(IMX8MM_CLK_WDOG1_ROOT,
imx_clk_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0));
clk_dm(IMX8MM_CLK_WDOG2_ROOT,
imx_clk_gate4("wdog2_root_clk", "wdog", base + 0x4540, 0));
clk_dm(IMX8MM_CLK_WDOG3_ROOT,
imx_clk_gate4("wdog3_root_clk", "wdog", base + 0x4550, 0));
clk_dm(IMX8MM_CLK_USDHC3_ROOT,
imx_clk_gate4("usdhc3_root_clk", "usdhc3", base + 0x45e0, 0));
clk_dm(IMX8MM_CLK_QSPI_ROOT,
imx_clk_gate4("qspi_root_clk", "qspi", base + 0x42f0, 0));
clk_dm(IMX8MM_CLK_USB1_CTRL_ROOT,
imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
/* clks not needed in SPL stage */
-
clk_dm(IMX8MM_CLK_ENET1_ROOT,
imx_clk_gate4("enet1_root_clk", "enet_axi",
base + 0x40a0, 0));
endif
For that I continue to put here the implementation. After we can port
the clk dm part to manipulate clock in drivers/clk/imx/ DM driver.
What do you think about? Let me know.
Seems like the clk_dm part is already in place and all you have to do is
extend it.
