Dear Albert ARIBAUD, Am 01.12.2010 12:36, schrieb Albert ARIBAUD: > hi Andreas, > > Le 01/12/2010 11:05, Andreas Bießmann a écrit : > >> I can not recommend a proper place for all boards cause this parameter >> is highly is board specific. > > Understood -- each board maintainer must select an adapted location for > the mirror.
Yes, but I have one thing to mention. This test does only detect writing to BSS values in one of the init_sequence[] functions. In my case I detected arch/arm/cpu/arm920t/at91/timer.c as faulty. But I still have some issues booting at91rm9200ek from NOR flash. None of the init_sequence[] functions writes to a BSS value in that case ... So if the 'corrupted .dyn.rel' thing is my problem in NOR booting case .dyn.rel got corrupted before board_init_f() or by some other function call between for loop of init_sequence[] and relocate_code() ... I don't know if I get this until release of v2010.12. Maybe another maintainer is more lucky ... regards Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot