On 3/21/22 15:26, Heiko Thiery wrote:
It was observed that enabling additional DM modules the configured
malloc value is not sufficient. So lets increase the value.
Signed-off-by: Heiko Thiery <heiko.thi...@gmail.com>
---
v2:
- add a more proper commit message to explan why the value was increased
configs/kontron_pitx_imx8m_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/kontron_pitx_imx8m_defconfig
b/configs/kontron_pitx_imx8m_defconfig
index 76430213e3..30c3586937 100644
--- a/configs/kontron_pitx_imx8m_defconfig
+++ b/configs/kontron_pitx_imx8m_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
CONFIG_SYS_MALLOC_LEN=0x600000
+CONFIG_SYS_MALLOC_F_LEN=0x10000
@Heiko
Should we really adjust this on board level? Won't we have the same
problem on all imx8m boards?
Why don't you change the default for all i.mx8 boards in /Kconfig?
@Tom, @Simon
Shouldn't we replace the default of 0x400 by 0x2000 generally?
Best regards
Heinrich
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
