This converts the readme for this board to rST. I have tried not to
change any semantics from the original (though I did convert MB to M).
Signed-off-by: Sean Anderson <sean.ander...@seco.com>
---
(no changes since v1)
board/freescale/ls1046ardb/MAINTAINERS | 1 +
board/freescale/ls1046ardb/README | 76 -------------------
doc/board/nxp/index.rst | 1 +
doc/board/nxp/ls1046ardb.rst | 100 +++++++++++++++++++++++++
4 files changed, 102 insertions(+), 76 deletions(-)
delete mode 100644 board/freescale/ls1046ardb/README
create mode 100644 doc/board/nxp/ls1046ardb.rst
diff --git a/board/freescale/ls1046ardb/MAINTAINERS
b/board/freescale/ls1046ardb/MAINTAINERS
index efdea22bde..3c8cfe720d 100644
--- a/board/freescale/ls1046ardb/MAINTAINERS
+++ b/board/freescale/ls1046ardb/MAINTAINERS
@@ -14,3 +14,4 @@ F: configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
F: configs/ls1046ardb_SECURE_BOOT_defconfig
F: configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
F: configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+F: doc/board/nxp/ls1046ardb.rst
diff --git a/board/freescale/ls1046ardb/README
b/board/freescale/ls1046ardb/README
deleted file mode 100644
index 90c44f4bce..0000000000
--- a/board/freescale/ls1046ardb/README
+++ /dev/null
@@ -1,76 +0,0 @@
-Overview
---------
-The LS1046A Reference Design Board (RDB) is a high-performance computing,
-evaluation, and development platform that supports the QorIQ LS1046A
-LayerScape Architecture processor. The LS1046ARDB provides SW development
-platform for the Freescale LS1046A processor series, with a complete
-debugging environment. The LS1046A RDB is lead-free and RoHS-compliant.
-
-LS1046A SoC Overview
---------------------
-Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
-SoC overview.
-
- LS1046ARDB board Overview
- -----------------------
- - SERDES1 Connections, 4 lanes supporting:
- - Lane0: 10GBase-R with x1 RJ45 connector
- - Lane1: 10GBase-R Cage
- - Lane2: SGMII.5
- - Lane3: SGMII.6
- - SERDES2 Connections, 4 lanes supporting:
- - Lane0: PCIe1 with miniPCIe slot
- - Lane1: PCIe2 with PCIe x2 slot
- - Lane2: PCIe3 with PCIe x4 slot
- - Lane3: SATA
- - DDR Controller
- - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
- -IFC/Local Bus
- - One 512 MB NAND flash with ECC support
- - CPLD connection
- - USB 3.0
- - one Type A port, one Micro-AB port
- - SDHC: connects directly to a full SD/MMC slot
- - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
- - 4 I2C controllers
- - UART
- - Two 4-pin serial ports at up to 115.2 Kbit/s
- - Two DB9 D-Type connectors supporting one Serial port each
- - ARM JTAG support
-
-Memory map from core's view
-----------------------------
-Start Address End Address Description Size
-0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
-0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
-0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
-0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
-0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
-0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
-0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB
-0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
-0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
-0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
-0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
-0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
-0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
-0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
-
-QSPI flash map:
-Start Address End Address Description Size
-0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB
-0x00_4010_0000 - 0x00_402F_FFFF U-Boot 2MB
-0x00_4030_0000 - 0x00_403F_FFFF U-Boot Env 1MB
-0x00_4040_0000 - 0x00_405F_FFFF PPA 2MB
-0x00_4060_0000 - 0x00_408F_FFFF Secure boot header
- + bootscript 3MB
-0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB
-0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB
-0x00_4098_0000 - 0x00_40FF_FFFF Reserved 6MB
-0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB
-
-Booting Options
----------------
-a) QSPI boot
-b) SD boot
-c) eMMC boot
diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst
index 63956287c5..4514b8951b 100644
--- a/doc/board/nxp/index.rst
+++ b/doc/board/nxp/index.rst
@@ -13,6 +13,7 @@ NXP Semiconductors
imx8qxp_mek
imxrt1020-evk
imxrt1050-evk
+ ls1046ardb
mx6sabreauto
mx6sabresd
mx6ul_14x14_evk
diff --git a/doc/board/nxp/ls1046ardb.rst b/doc/board/nxp/ls1046ardb.rst
new file mode 100644
index 0000000000..4bfeaa93dd
--- /dev/null
+++ b/doc/board/nxp/ls1046ardb.rst
@@ -0,0 +1,100 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+LS1046ARDB
+==========
+
+The LS1046A Reference Design Board (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS1046A
+LayerScape Architecture processor. The LS1046ARDB provides SW development
+platform for the Freescale LS1046A processor series, with a complete
+debugging environment. The LS1046A RDB is lead-free and RoHS-compliant.
+
+LS1046A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
+SoC overview.
+
+LS1046ARDB board Overview
+-------------------------
+- SERDES1 Connections, 4 lanes supporting:
+
+ - Lane0: 10GBase-R with x1 RJ45 connector
+ - Lane1: 10GBase-R Cage
+ - Lane2: SGMII.5
+ - Lane3: SGMII.6
+
+- SERDES2 Connections, 4 lanes supporting:
+
+ - Lane0: PCIe1 with miniPCIe slot
+ - Lane1: PCIe2 with PCIe x2 slot
+ - Lane2: PCIe3 with PCIe x4 slot
+ - Lane3: SATA
+
+- DDR Controller
+
+ - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
+
+- IFC/Local Bus
+
+ - One 512 MB NAND flash with ECC support
+ - CPLD connection
+
+- USB 3.0
+
+ - one Type A port, one Micro-AB port
+
+- SDHC: connects directly to a full SD/MMC slot
+- DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+- 4 I2C controllers
+- UART
+
+ - Two 4-pin serial ports at up to 115.2 Kbit/s
+ - Two DB9 D-Type connectors supporting one Serial port each
+
+- ARM JTAG support
+
+Memory map from core's view
+----------------------------
+
+================== ================== ================ =====
+Start Address End Address Description Size
+================== ================== ================ =====
+``0x00_0000_0000`` ``0x00_000F_FFFF`` Secure Boot ROM 1M
+``0x00_0100_0000`` ``0x00_0FFF_FFFF`` CCSRBAR 240M
+``0x00_1000_0000`` ``0x00_1000_FFFF`` OCRAM0 64K
+``0x00_1001_0000`` ``0x00_1001_FFFF`` OCRAM1 64K
+``0x00_2000_0000`` ``0x00_20FF_FFFF`` DCSR 16M
+``0x00_7E80_0000`` ``0x00_7E80_FFFF`` IFC - NAND Flash 64K
+``0x00_7FB0_0000`` ``0x00_7FB0_0FFF`` IFC - CPLD 4K
+``0x00_8000_0000`` ``0x00_FFFF_FFFF`` DRAM1 2G
+``0x05_0000_0000`` ``0x05_07FF_FFFF`` QMAN S/W Portal 128M
+``0x05_0800_0000`` ``0x05_0FFF_FFFF`` BMAN S/W Portal 128M
+``0x08_8000_0000`` ``0x09_FFFF_FFFF`` DRAM2 6G
+``0x40_0000_0000`` ``0x47_FFFF_FFFF`` PCI Express1 32G
+``0x48_0000_0000`` ``0x4F_FFFF_FFFF`` PCI Express2 32G
+``0x50_0000_0000`` ``0x57_FFFF_FFFF`` PCI Express3 32G
+================== ================== ================ =====
+
+QSPI flash map
+--------------
+
+================== ================== ================== =====
+Start Address End Address Description Size
+================== ================== ================== =====
+``0x00_4000_0000`` ``0x00_400F_FFFF`` RCW + PBI 1M
+``0x00_4010_0000`` ``0x00_402F_FFFF`` U-Boot 2M
+``0x00_4030_0000`` ``0x00_403F_FFFF`` U-Boot Env 1M
+``0x00_4040_0000`` ``0x00_405F_FFFF`` PPA 2M
+``0x00_4060_0000`` ``0x00_408F_FFFF`` Secure boot header 3M
+ + bootscript
+``0x00_4090_0000`` ``0x00_4093_FFFF`` FMan ucode 256K
+``0x00_4094_0000`` ``0x00_4097_FFFF`` QE/uQE firmware 256K
+``0x00_4098_0000`` ``0x00_40FF_FFFF`` Reserved 6M
+``0x00_4100_0000`` ``0x00_43FF_FFFF`` FIT Image 48M
+================== ================== ================== =====
+
+Booting Options
+---------------
+- QSPI boot
+- SD boot
+- eMMC boot
--
2.25.1
