Note: pwclient dies on patch 73644 with the following alb...@lilith:~/src/u-boot$ pwclient apply 73644 Applying patch #73644 to current directory Description: [U-Boot,v2,1/4] at91rm9200ek: add configure target for RAM boot Traceback (most recent call last): File "/home/albert/bin/pwclient", line 463, in <module> main() File "/home/albert/bin/pwclient", line 446, in main action_apply(rpc, patch_id) File "/home/albert/bin/pwclient", line 263, in action_apply proc.communicate(s) File "/usr/lib/python2.6/subprocess.py", line 680, in communicate self.stdin.write(input) UnicodeEncodeError: 'ascii' codec can't encode character u'\xdf' in position 605: ordinal not in range(128)
I'd wager it does not like Andreas' last name. Le 01/12/2010 16:13, Andreas Bießmann a écrit : > Dear Albert ARIBAUD, > > Am 01.12.2010 13:49, schrieb Albert ARIBAUD: >> thanks Andreas, >> > >> >> What is the exact symptom? does the board display anything on its >> console, or does it stay completely silent? > > I see the banner and 'DRAM: 32 MiB' on serial console. If I activate > DEBUG in a/a/l/board.c I can see the debug messages up to 'relocation > Offset is ...' Thanks. The size of u-boot.bin is right for sections .text to .dynsym inclusive as listed by readelf -a. The content of the binary u-boot.bin correctly reflects the .rel.dyn and .dynsym sections of the ELF u-boot file. _rel_dyn_start_ofs, _rel_dyn_end_ofs and _dynsym_start_ofs> all contain correct offsets to their respective targets. This means that if the u-boot.bin is correctly flashed to NOR, and if nothing touches the .rel.dyn and .dynsym section, relocation is done correctly. But... with your fixes applied above v2010.12-rc2, as you indicated, you don't have the fix for not using r8 during relocation, which means GD is completely bogus after relocation. Can you apply this fix too? > regards > > Andreas Bießmann Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot