+Heinrich Schuchardt
On Thu, Mar 24, 2022 at 10:51 PM Alex <kallis...@unixzen.com> wrote: > > Good morning! > > So, some time ago I wrote a short guide on how to debug EFI bootloaders > started > by u-boot in qemu. > > https://www.haiku-os.org/blog/kallisti5/2021-01-17_debugging_riscv-64_bootloader_in_qemu/ > > At the time it worked, however figuring the elf load addresses from u-boot > was extremely > difficult and required compiling it with full tracing and taking guesses at > various EFI: Entry efi_load_image messages until I found the correct address. > > Is there an easier way to find the load addresses? If not, a more verbose > message > on non-debug builds might be extremely useful here. > > "positioning image at address 0xfe6b0000" or something > > using the leveraged kernel_addr_r (0x84000000) was not enough. > > -- Alex