Dear Mark Underwood, In message <1291273748.31320.3.ca...@bertha> you wrote: > > I've got an sbc6000x from www.armkits.com. I've been working through how > to put debian onto this board and was making some progress (im just a > beginner), but now I > dont have network access when at the U-boot prompt. The Board is > connected to the network as the link light is on on the interface. As > soon as I try to ping the board itself ie ping 192.192.192.200 (the > default ip address) the link light goes out. this is from the command > line
Well, I guess you did not read the FAQ... > U-Boot> printenv > bootcmd=nand read 0x22000000 0x1A0000 0x200000; bootm 0x22000000 > bootdelay=3 > baudrate=115200 > ethaddr=DE:AD:BE:EF:01:01 Ouch. See FAQ 14.2.13. Ethernet Does Not Work See also 14.2.14. Where Can I Get a Valid MAC Address from? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "What if" is a trademark of Hewlett Packard, so stop using it in your sentences without permission, or risk being sued. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot