This imports defines for R1 responses from include/linux/mmc/mmc.h from Linux 5.10.
Signed-off-by: Sean Anderson <sean...@gmail.com> --- Yes, this is an old version, but it's what I had checked out, and I don't think there are any new fields we need to handle :) include/mmc.h | 52 +++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 50 insertions(+), 2 deletions(-) diff --git a/include/mmc.h b/include/mmc.h index 6bdcce881d..7304eee0d4 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -311,8 +311,56 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ #define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ -#define R1_ILLEGAL_COMMAND (1 << 22) -#define R1_APP_CMD (1 << 5) +/* + MMC status in R1, for native mode (SPI bits are different) + Type + e : error bit + s : status bit + r : detected and set for the actual command response + x : detected and set during command execution. the host must poll + the card by sending status command in order to read these bits. + Clear condition + a : according to the card state + b : always related to the previous command. Reception of + a valid command will clear it (with a delay of one command) + c : clear by read + */ + +#define R1_OUT_OF_RANGE (1 << 31) /* er, c */ +#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ +#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ +#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ +#define R1_ERASE_PARAM (1 << 27) /* ex, c */ +#define R1_WP_VIOLATION (1 << 26) /* erx, c */ +#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ +#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ +#define R1_COM_CRC_ERROR (1 << 23) /* er, b */ +#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ +#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ +#define R1_CC_ERROR (1 << 20) /* erx, c */ +#define R1_ERROR (1 << 19) /* erx, c */ +#define R1_UNDERRUN (1 << 18) /* ex, c */ +#define R1_OVERRUN (1 << 17) /* ex, c */ +#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ +#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ +#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ +#define R1_ERASE_RESET (1 << 13) /* sr, c */ +#define R1_STATUS(x) (x & 0xFFF9A000) +#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ +#define R1_READY_FOR_DATA (1 << 8) /* sx, a */ +#define R1_SWITCH_ERROR (1 << 7) /* sx, c */ +#define R1_EXCEPTION_EVENT (1 << 6) /* sr, a */ +#define R1_APP_CMD (1 << 5) /* sr, c */ + +#define R1_STATE_IDLE 0 +#define R1_STATE_READY 1 +#define R1_STATE_IDENT 2 +#define R1_STATE_STBY 3 +#define R1_STATE_TRAN 4 +#define R1_STATE_DATA 5 +#define R1_STATE_RCV 6 +#define R1_STATE_PRG 7 +#define R1_STATE_DIS 8 #define MMC_RSP_PRESENT (1 << 0) #define MMC_RSP_136 (1 << 1) /* 136 bit response */ -- 2.35.1
