QorIQ pre-PBL BootROM scans first 24 SD card sectors (each with fixed 512
bytes length) for boot signature. Implement same redundancy behavior in
fsl_esdhc_spl driver to allow loading proper U-Boot when boot sector is not
the first one.

Signed-off-by: Pali Rohár <p...@kernel.org>
---
 drivers/mmc/fsl_esdhc_spl.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
index 0146a231b221..ea8f4cd66964 100644
--- a/drivers/mmc/fsl_esdhc_spl.c
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -20,7 +20,6 @@
 #define ESDHC_BOOT_IMAGE_ADDR  0x50
 #define MBRDBR_BOOT_SIG_55     0x1fe
 #define MBRDBR_BOOT_SIG_AA     0x1ff
-#define CONFIG_CFG_DATA_SECTOR 0
 
 
 void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
@@ -62,11 +61,13 @@ void __noreturn mmc_boot(void)
 #ifndef CONFIG_FSL_CORENET
        uchar *tmp_buf;
        u32 blklen;
+       u32 blk_off;
        uchar val;
 #ifndef CONFIG_SPL_FSL_PBL
        u32 val32;
 #endif
        uint i, byte_num;
+       u32 sector;
 #endif
        u32 offset, code_len;
        struct mmc *mmc;
@@ -86,30 +87,37 @@ void __noreturn mmc_boot(void)
        offset = CONFIG_SYS_MMC_U_BOOT_OFFS;
 #else
        blklen = mmc->read_bl_len;
+       if (blklen < 512)
+               blklen = 512;
        tmp_buf = malloc(blklen);
        if (!tmp_buf) {
                puts("spl: malloc memory failed!!\n");
                hang();
        }
+
+       sector = 0;
+again:
        memset(tmp_buf, 0, blklen);
 
        /*
        * Read source addr from sd card
        */
-       err = mmc->block_dev.block_read(&mmc->block_dev,
-                                       CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
+       blk_start = (sector * 512) / mmc->read_bl_len;
+       blk_off = (sector * 512) % mmc->read_bl_len;
+       blk_cnt = DIV_ROUND_UP(512,  mmc->read_bl_len);
+       err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt, 
tmp_buf);
        if (err != 1) {
                puts("spl: mmc read failed!!\n");
                hang();
        }
 
 #ifdef CONFIG_SPL_FSL_PBL
-       val = *(tmp_buf + MBRDBR_BOOT_SIG_55);
+       val = *(tmp_buf + blk_off + MBRDBR_BOOT_SIG_55);
        if (0x55 != val) {
                puts("spl: mmc MBR/DBR signature is not valid!!\n");
                hang();
        }
-       val = *(tmp_buf + MBRDBR_BOOT_SIG_AA);
+       val = *(tmp_buf + blk_off + MBRDBR_BOOT_SIG_AA);
        if (0xAA != val) {
                puts("spl: mmc MBR/DBR signature is not valid!!\n");
                hang();
@@ -123,10 +131,13 @@ void __noreturn mmc_boot(void)
        byte_num = 4;
        val32 = 0;
        for (i = 0; i < byte_num; i++) {
-               val = *(tmp_buf + ESDHC_BOOT_SIGNATURE_OFF + i);
+               val = *(tmp_buf + blk_off + ESDHC_BOOT_SIGNATURE_OFF + i);
                val32 = (val32 << 8) + val;
        }
        if (val32 != ESDHC_BOOT_SIGNATURE) {
+               /* BOOT signature may be on the first 24 sectors (each being 
512 bytes) */
+               if (++sector < 24)
+                       goto again;
                puts("spl: mmc BOOT signature is not valid!!\n");
                hang();
        }
@@ -135,7 +146,7 @@ void __noreturn mmc_boot(void)
        byte_num = 4;
        offset = 0;
        for (i = 0; i < byte_num; i++) {
-               val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i);
+               val = *(tmp_buf + blk_off + ESDHC_BOOT_IMAGE_ADDR + i);
                offset = (offset << 8) + val;
        }
        offset += CONFIG_SYS_MMC_U_BOOT_OFFS;
-- 
2.20.1

Reply via email to