On Wed, Apr 6, 2022 at 7:27 AM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Adam, > > On Wed, Apr 6, 2022 at 9:22 AM Adam Ford <aford...@gmail.com> wrote: > > > I tried to build the imx8mq last night, but I ran into issues. I > > never built an imx8mq bootloader before, so I think I'm missing > > something. I'll try to get to it again this week. Sorry for the > > delays. > > Please check doc/board/nxp/imx8mq_evk.rst for a reference.
Thanks for the heads up on the help file. I was looking in the wrong place for it. > > The flash.bin offset is 33K instead of 32K on imx8mm. Unfortunately, the board hangs: U-Boot SPL 2022.04-rc5-gfd0c0181d8 (Apr 06 2022 - 07:36:33 -0500) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 <hang> I am not sure if it's related to your changes or something else is broken. I have to switch gears for now, but I'll try the master branch to see if there are any differences in behavior once I have some more time. adam