Add support for OF-LIST to common imx8mp-u-boot.dtsi so that it can
be used with boards that have multiple DTB's.
Signed-off-by: Tim Harvey <thar...@gateworks.com>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-...@nxp.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Teresa Remmet <t.rem...@phytec.de>
Cc: Ying-Chun Liu (PaulLiu) <paul....@linaro.org>
Cc: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
arch/arm/dts/imx8mp-u-boot.dtsi | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index cfc352ae34af..20edd90cfad8 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -99,8 +99,9 @@
fit {
description = "Configuration to load ATF before U-Boot";
- #address-cells = <1>;
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
images {
uboot {
@@ -129,7 +130,7 @@
};
};
- fdt {
+ @fdt-SEQ {
description = "NAME";
type = "flat_dt";
compression = "none";
@@ -141,13 +142,13 @@
};
configurations {
- default = "conf";
+ default = "@config-DEFAULT-SEQ";
- conf {
+ @config-SEQ {
description = "NAME";
+ fdt = "fdt-SEQ";
firmware = "uboot";
loadables = "atf";
- fdt = "fdt";
};
};
};
--
2.17.1
