On 3/24/22 10:57, Robert Marko wrote:
Update the uDPU DTS to the version that is pending upstream [1][2].
[1]
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1107016-1-robert.ma...@sartura.hr/
[2]
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1107016-2-robert.ma...@sartura.hr/
Signed-off-by: Robert Marko <robert.ma...@sartura.hr>
Applied to u-boot-marvell/master
Thanks,
Stefan
---
arch/arm/dts/armada-3720-uDPU.dts | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/armada-3720-uDPU.dts
b/arch/arm/dts/armada-3720-uDPU.dts
index 95d46e8d08..1f534c0c65 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -99,7 +99,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- m25p80@0 {
+ spi-flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <54000000>;
@@ -108,10 +108,15 @@
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
- /* only bootloader is located on the SPI */
+
partition@0 {
- label = "uboot";
- reg = <0 0x400000>;
+ label = "firmware";
+ reg = <0x0 0x180000>;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x10000>;
};
};
};
@@ -148,15 +153,15 @@
scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- lm75@48 {
+ nct375@48 {
status = "okay";
- compatible = "lm75";
+ compatible = "ti,tmp75c";
reg = <0x48>;
};
- lm75@49 {
+ nct375@49 {
status = "okay";
- compatible = "lm75";
+ compatible = "ti,tmp75c";
reg = <0x49>;
};
};
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
