Always consider USB cable is connected when USB boot device is detected. Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com> ---
board/st/stm32mp1/stm32mp1.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index fff1880e5b..62a5fc23e6 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -199,6 +199,13 @@ int g_dnl_board_usb_cable_connected(void) if (!IS_ENABLED(CONFIG_USB_GADGET_DWC2_OTG)) return -ENODEV; + /* + * In case of USB boot device is detected, consider USB cable is + * connected + */ + if ((get_bootmode() & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_USB) + return true; + /* if typec stusb160x is present, means DK1 or DK2 board */ ret = stusb160x_cable_connected(); if (ret >= 0) -- 2.17.1