On 02.05.22 05:16, Chris Packham wrote:
MPP55 is used as a reset connected to the L3 switch chip. This doesn't
matter for u-boot as it doesn't use the L3 switch but it is useful to
be able to toggle the switch in/out of reset for the OS.
Signed-off-by: Chris Packham <judge.pack...@gmail.com>
---
I sent this out a while back but it was part of a series that has been dropped
for the time being. There's not reason to hold this change up behind the other
so I'm sending it as a standalong change.
Applied to u-boot-marvell/master
Thanks,
Stefan
board/alliedtelesis/x530/x530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c
index c0ec2afa3011..cbf4533e78de 100644
--- a/board/alliedtelesis/x530/x530.c
+++ b/board/alliedtelesis/x530/x530.c
@@ -93,7 +93,7 @@ int board_early_init_f(void)
writel(0x55550550, MVEBU_MPP_BASE + 0x0c);
writel(0x55555555, MVEBU_MPP_BASE + 0x10);
writel(0x00100565, MVEBU_MPP_BASE + 0x14);
- writel(0x40000000, MVEBU_MPP_BASE + 0x18);
+ writel(0x00000000, MVEBU_MPP_BASE + 0x18);
writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
return 0;
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
