From: Peng Fan <peng....@nxp.com>
pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
board/menlo/mx8menlo/mx8menlo.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/board/menlo/mx8menlo/mx8menlo.c b/board/menlo/mx8menlo/mx8menlo.c
index 95ff95ad360..9d3708a3637 100644
--- a/board/menlo/mx8menlo/mx8menlo.c
+++ b/board/menlo/mx8menlo/mx8menlo.c
@@ -12,12 +12,6 @@
#include <asm/mach-imx/iomux-v3.h>
#include <spl.h>
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
#define SNVS_BASE_ADDR 0x30370000
#define SNVS_LPSR 0x4c
#define SNVS_LPLVDR 0x64
@@ -35,12 +29,6 @@ static void setup_snvs(void)
void board_early_init(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
init_uart_clk(1);
setup_snvs();
--
2.36.0
