From: Peng Fan <peng....@nxp.com>

Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng....@nxp.com>
Reviewed-by: Fabio Estevam <feste...@denx.de>
---
 board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 8 --------
 configs/imx8mp_rsb3720a1_4G_defconfig               | 1 +
 configs/imx8mp_rsb3720a1_6G_defconfig               | 1 +
 include/configs/imx8mp_rsb3720.h                    | 2 --
 4 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c 
b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
index 782025dc785..f129ebd429b 100644
--- a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
+++ b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
@@ -28,14 +28,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL  (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL  (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
-static const iomux_v3_cfg_t uart_pads[] = {
-       MX8MP_PAD_ECSPI1_SCLK__UART3_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX8MP_PAD_ECSPI1_MOSI__UART3_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static const iomux_v3_cfg_t wdog_pads[] = {
        MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -81,8 +75,6 @@ int board_early_init_f(void)
 
        set_wdog_reset(wdog);
 
-       imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
        init_uart_clk(2);
 
        return 0;
diff --git a/configs/imx8mp_rsb3720a1_4G_defconfig 
b/configs/imx8mp_rsb3720a1_4G_defconfig
index a7585ba71f0..b5a2add43da 100644
--- a/configs/imx8mp_rsb3720a1_4G_defconfig
+++ b/configs/imx8mp_rsb3720a1_4G_defconfig
@@ -135,6 +135,7 @@ CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_S35392A=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/imx8mp_rsb3720a1_6G_defconfig 
b/configs/imx8mp_rsb3720a1_6G_defconfig
index 5d06dc4a88d..5f04f392ede 100644
--- a/configs/imx8mp_rsb3720a1_6G_defconfig
+++ b/configs/imx8mp_rsb3720a1_6G_defconfig
@@ -136,6 +136,7 @@ CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_S35392A=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
index c5dd545471e..f2d9fa8cbf9 100644
--- a/include/configs/imx8mp_rsb3720.h
+++ b/include/configs/imx8mp_rsb3720.h
@@ -169,8 +169,6 @@
 #define PHYS_SDRAM_2_SIZE              0x80000000      /* 2 GB */
 #endif
 
-#define CONFIG_MXC_UART_BASE           UART3_BASE_ADDR
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              2048
 #define CONFIG_SYS_MAXARGS             64
-- 
2.36.0

Reply via email to