Long TFTP transfers lead to a wall of # characters on UART, which in the end may slow down the transfer itself. Use CONFIG_TFTP_TSIZE to print progress in fewer # characters.
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com> --- configs/stm32mp15_basic_defconfig | 1 + configs/stm32mp15_defconfig | 1 + configs/stm32mp15_trusted_defconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 5d1b2e0fd7..1b1c255b98 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -80,6 +80,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=-1 # CONFIG_SPL_ENV_IS_NOWHERE is not set # CONFIG_SPL_ENV_IS_IN_SPI_FLASH is not set +CONFIG_TFTP_TSIZE=y CONFIG_STM32_ADC=y CONFIG_SET_DFU_ALT_INFO=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index f6e7fc81b0..02b37e14ea 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -61,6 +61,7 @@ CONFIG_ENV_UBI_VOLUME="uboot_config" CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=-1 +CONFIG_TFTP_TSIZE=y CONFIG_STM32_ADC=y CONFIG_CLK_SCMI=y CONFIG_SET_DFU_ALT_INFO=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index 855a394893..df31c0fbb1 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -62,6 +62,7 @@ CONFIG_ENV_UBI_VOLUME="uboot_config" CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=-1 +CONFIG_TFTP_TSIZE=y CONFIG_STM32_ADC=y CONFIG_CLK_SCMI=y CONFIG_SET_DFU_ALT_INFO=y -- 2.25.1
