On Wed, May 4, 2022 at 6:54 PM Peng Fan (OSS) <peng....@oss.nxp.com> wrote: > > > > On 2022/5/4 20:53, Marek Vasut wrote: > > On 5/4/22 14:26, Peng Fan wrote: > >> Hi Marek, > > > > Hi, > > > >> Since you did some work on i.MX8MP USB, may I know the status? > >> Does host/device mode both supported in upstream? > > > > I only have HOST option available, so for me this is only HOST. > > > > I did not test GADGET or OTG . > > > >> Any plan on PTN5110 support? > > > > I currently don't have hardware with USB-C , so not right now. > > > > Do you plan to work on GADGET/OTG/USB-C ? > > Typec interface exists in almost all i.MX8M EVK boards. So > I am thinking to enable gadget together with PTN5110 for uuu, but > seems typec requires quite lot work if porting linux code or we > reuse NXP U-Boot downstream ptn5110 code. > > Thanks, > Peng. >
Peng, The imx8mp-venice-gw74xx has a Type-C connector on it with USB3.0 as well (uses a TPS25821 source controller/power-switch which doesn't have any I2C interface thus no driver). Please cc me if you come up with a DWC3 OTG gadget driver and I can test it on this board. Best Regards, Tim