From: Peng Fan <peng....@nxp.com>
By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after
we update the binman dtsi to drop 0x8000/0x4000 length for the firmware.
And that could save binary size for many KBs.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
drivers/ddr/imx/imx8m/helper.c | 45 ++++++++++++++++++++++++++++++----
1 file changed, 40 insertions(+), 5 deletions(-)
diff --git a/drivers/ddr/imx/imx8m/helper.c b/drivers/ddr/imx/imx8m/helper.c
index f23904bf712..cd93d129dc0 100644
--- a/drivers/ddr/imx/imx8m/helper.c
+++ b/drivers/ddr/imx/imx8m/helper.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
+#include <binman_sym.h>
#include <log.h>
#include <spl.h>
#include <asm/global_data.h>
@@ -25,6 +26,20 @@ DECLARE_GLOBAL_DATA_PTR;
#define DMEM_OFFSET_ADDR 0x00054000
#define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
+binman_sym_declare(ulong, blob_ext_1, image_pos);
+binman_sym_declare(ulong, blob_ext_1, size);
+
+binman_sym_declare(ulong, blob_ext_2, image_pos);
+binman_sym_declare(ulong, blob_ext_2, size);
+
+#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
+binman_sym_declare(ulong, blob_ext_3, image_pos);
+binman_sym_declare(ulong, blob_ext_3, size);
+
+binman_sym_declare(ulong, blob_ext_4, image_pos);
+binman_sym_declare(ulong, blob_ext_4, size);
+#endif
+
/* We need PHY iMEM PHY is 32KB padded */
void ddr_load_train_firmware(enum fw_type type)
{
@@ -34,6 +49,7 @@ void ddr_load_train_firmware(enum fw_type type)
unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0;
unsigned long imem_start = (unsigned long)&_end + fw_offset;
unsigned long dmem_start;
+ unsigned long imem_len = IMEM_LEN, dmem_len = DMEM_LEN;
#ifdef CONFIG_SPL_OF_CONTROL
if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) {
@@ -43,11 +59,30 @@ void ddr_load_train_firmware(enum fw_type type)
}
#endif
- dmem_start = imem_start + IMEM_LEN;
+ if (CONFIG_IS_ENABLED(BINMAN_SYMBOLS)) {
+ switch (type) {
+ case FW_1D_IMAGE:
+ imem_start = binman_sym(ulong, blob_ext_1, image_pos);
+ imem_len = binman_sym(ulong, blob_ext_1, size);
+ dmem_start = binman_sym(ulong, blob_ext_2, image_pos);
+ dmem_len = binman_sym(ulong, blob_ext_2, size);
+ break;
+ case FW_2D_IMAGE:
+#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
+ imem_start = binman_sym(ulong, blob_ext_3, image_pos);
+ imem_len = binman_sym(ulong, blob_ext_3, size);
+ dmem_start = binman_sym(ulong, blob_ext_4, image_pos);
+ dmem_len = binman_sym(ulong, blob_ext_4, size);
+#endif
+ break;
+ }
+ }
+
+ dmem_start = imem_start + imem_len;
pr_from32 = imem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
- for (i = 0x0; i < IMEM_LEN; ) {
+ for (i = 0x0; i < imem_len; ) {
tmp32 = readl(pr_from32);
writew(tmp32 & 0x0000ffff, pr_to32);
pr_to32 += 4;
@@ -59,7 +94,7 @@ void ddr_load_train_firmware(enum fw_type type)
pr_from32 = dmem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
- for (i = 0x0; i < DMEM_LEN; ) {
+ for (i = 0x0; i < dmem_len; ) {
tmp32 = readl(pr_from32);
writew(tmp32 & 0x0000ffff, pr_to32);
pr_to32 += 4;
@@ -72,7 +107,7 @@ void ddr_load_train_firmware(enum fw_type type)
debug("check ddr_pmu_train_imem code\n");
pr_from32 = imem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
- for (i = 0x0; i < IMEM_LEN; ) {
+ for (i = 0x0; i < imem_len; ) {
tmp32 = (readw(pr_to32) & 0x0000ffff);
pr_to32 += 4;
tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
@@ -93,7 +128,7 @@ void ddr_load_train_firmware(enum fw_type type)
debug("check ddr4_pmu_train_dmem code\n");
pr_from32 = dmem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
- for (i = 0x0; i < DMEM_LEN;) {
+ for (i = 0x0; i < dmem_len;) {
tmp32 = (readw(pr_to32) & 0x0000ffff);
pr_to32 += 4;
tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
--
2.36.0
