This allows to concatenate SPL and proper U-Boot without extra alignment.

Signed-off-by: Pali Rohár <p...@kernel.org>
---
 drivers/mmc/fsl_esdhc_spl.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
index 760f13d24018..e3175de16bab 100644
--- a/drivers/mmc/fsl_esdhc_spl.c
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -155,10 +155,21 @@ again:
        * Load U-Boot image from mmc into RAM
        */
        code_len = CONFIG_SYS_MMC_U_BOOT_SIZE;
-       blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
-       blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
+       blk_start = offset / mmc->read_bl_len;
+       blk_off = offset % mmc->read_bl_len;
+       blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len + 1;
+       if (blk_off) {
+               err = mmc->block_dev.block_read(&mmc->block_dev,
+                                               blk_start, 1, tmp_buf);
+               if (err != 1) {
+                       puts("spl: mmc read failed!!\n");
+                       hang();
+               }
+               blk_start++;
+       }
        err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
-                                       (uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
+                                       (uchar *)CONFIG_SYS_MMC_U_BOOT_DST +
+                                       (blk_off ? (mmc->read_bl_len - blk_off) 
: 0));
        if (err != blk_cnt) {
                puts("spl: mmc read failed!!\n");
 #ifndef CONFIG_FSL_CORENET
@@ -166,6 +177,14 @@ again:
 #endif
                hang();
        }
+       /*
+        * SDHC DMA may erase bytes at dst + bl_len - blk_off - 8
+        * due to unaligned access. So copy leading bytes from tmp_buf
+        * after SDHC DMA transfer.
+        */
+       if (blk_off)
+               memcpy((uchar *)CONFIG_SYS_MMC_U_BOOT_DST,
+                      tmp_buf + blk_off, mmc->read_bl_len - blk_off);
 
        /*
        * Clean d-cache and invalidate i-cache, to
-- 
2.20.1

Reply via email to