When the board was added, enabling tzc380 was left off by
mistake. The optee was tested with the following configuration
in s2pro
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 6MiB */
+ optee_core@5f800000 {
+ reg = <0x00 0x5f800000 0x00 0x600000>;
+ };
+
+ /* 2MiB */
+ optee_shm@5fe00000 {
+ reg = <0x00 0x5fe00000 0x00 0x200000>;
+ };
+ };
+
Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
---
board/bsh/imx8mn_smm_s2/spl.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/bsh/imx8mn_smm_s2/spl.c b/board/bsh/imx8mn_smm_s2/spl.c
index 097b60c055..549fc6992b 100644
--- a/board/bsh/imx8mn_smm_s2/spl.c
+++ b/board/bsh/imx8mn_smm_s2/spl.c
@@ -86,6 +86,8 @@ void board_init_f(ulong dummy)
preloader_console_init();
+ enable_tzc380();
+
/* DDR initialization */
spl_dram_init();
--
2.25.1
