On 06.05.22 11:05, Pali Rohár wrote:
Use CONFIG_VAL(DEBUG_UART_BASE) instead of CONFIG_DEBUG_UART_BASE, so
proper config value (CONFIG_DEBUG_UART_BASE or CONFIG_SPL_DEBUG_UART_BASE)
is used based on building target.
Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
drivers/serial/ns16550.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index a4220fd0ae2f..78bfe6281ce3 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -325,7 +325,7 @@ int ns16550_tstc(struct ns16550 *com_port)
static inline void _debug_uart_init(void)
{
- struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
+ struct ns16550 *com_port = (struct ns16550
*)CONFIG_VAL(DEBUG_UART_BASE);
int baud_divisor;
/*
@@ -360,7 +360,7 @@ static inline int NS16550_read_baud_divisor(struct ns16550
*com_port)
static inline void _debug_uart_putc(int ch)
{
- struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
+ struct ns16550 *com_port = (struct ns16550
*)CONFIG_VAL(DEBUG_UART_BASE);
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) {
#ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
