On Wednesday 11 May 2022 20:59:24 Pali Rohár wrote: > On Monday 25 April 2022 14:31:16 Pali Rohár wrote: > > On Monday 25 April 2022 04:27:51 Priyanka Jain (OSS) wrote: > > > >-----Original Message----- > > > >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Pali Rohár > > > >Sent: Tuesday, April 5, 2022 6:43 PM > > > >To: Priyanka Jain <priyanka.j...@nxp.com>; Qiang Zhao > > > ><qiang.z...@nxp.com>; > > > >Shengzhou Liu <shengzhou....@nxp.com>; Alexander Graf <ag...@csgraf.de>; > > > >Bin Meng <bmeng...@gmail.com>; Wolfgang Denk <w...@denx.de>; Sinan > > > >Akman <si...@writeme.com> > > > >Cc: u-boot@lists.denx.de > > > >Subject: [PATCH 7/8] powerpc: mpc85xx: Set TEXT_BASE addresses to real > > > >base > > > >values > > > > > > > >Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are > > > >manually increased by 0x1000 due to .bootpg section. This section has > > > >size of > > > >0x1000 bytes and is manually put by linker script before .text section > > > >(and > > > >therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is > > > >set. Due to this fact lot of other config options are manually increased > > > >by > > > >0x1000 value to make correct layout. Note that entry point is not on > > > >CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address > > > >CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image). > > > > > > > >Cleanup handling of .bootpg section when > > > >CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Put .bootpg code directly into > > > >.text > > > >section and move text base address to the start of .bootpg code. And > > > >finally > > > >remove +0x1000 value from lot of config options. With this removal custom > > > >PHDRS is not used anymore, so remove it too. > > > > > > > >After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at > > > >address -0x1000 anymore. > > > > > > > >Tested on P2020 board with SPL and proper U-Boot. > > > > > > > >Signed-off-by: Pali Rohár <p...@kernel.org> > > > >--- > > > > > > Kindly rebase to top of tree. There has been changed related configs. > > > I am picking patches till 6/8. So just send next version of 7/8 and 8/8 > > > > Done! I rebased 7/8 on top of master and sent V2 to ML. 8/8 in current > > version still cleanly applied on 7/8, so I did not resent it. If there > > is some issue, please let me know. > > PING?
Priyanka: PING