[PATCH 5/8] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards

[Philip Oberfichtner]

Firstly the fec can now use the regulator reg_eth_vio from
imx6qdl-dhcom-som.dtsi instead of defining its own.

Secondly the &fec node is moved to the more generic SoM device tree
file, because it can be used by multiple boards.

Signed-off-by: Philip Oberfichtner <p...@denx.de>
---

 arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi | 13 -------------
 arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi      |  7 +++++++
 2 files changed, 7 insertions(+), 13 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi 
b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
index a1ffb1d6fc..0673c21e3c 100644
--- a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
@@ -5,19 +5,6 @@
 
 #include "imx6qdl-dhcom-u-boot.dtsi"
 
-/ {
-       fec_vio: regulator-fec {
-               compatible = "regulator-fixed";
-
-               regulator-name = "fec-vio";
-               gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
-       };
-};
-
 &fec {
        phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-       phy-reset-duration = <1>;
-       phy-reset-post-delay = <10>;
-
-       phy-supply = <&fec_vio>;
 };
diff --git a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi 
b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
index 91545ab6e9..190567ab7b 100644
--- a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+)
 /*
  * Copyright (C) 2020 Harald Seiler <h...@denx.de>
+ * Copyright (C) 2022 Philip Oberfichtner <p...@denx.de>
  */
 
 / {
@@ -9,6 +10,12 @@
        };
 };
 
+&fec {
+       phy-reset-duration = <1>;
+       phy-reset-post-delay = <10>;
+       phy-supply = <&reg_eth_vio>;
+};
+
 &i2c3 {
        eeprom0: eeprom@50 {
        };
-- 
2.34.1