[PATCH v2 1/8] ARM: imx6: Fix broken DT path in DH board file

[Philip Oberfichtner]

In the DH electronics iMX6 board file fix the outdated eeprom path by
using a DT label instead.

The label has been newly created for all iMX6QDL DHCOM boards.

Reviewed-by: Marek Vasut <ma...@denx.de>
Signed-off-by: Philip Oberfichtner <p...@denx.de>

---

Changes in v2:
- Reviewed-by Marek

 arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi | 11 +++++++++++
 board/dhelectronics/dh_imx6/dh_imx6.c  |  4 ++--
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi 
b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
index 4c3b5e82d6..91545ab6e9 100644
--- a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
@@ -3,6 +3,17 @@
  * Copyright (C) 2020 Harald Seiler <h...@denx.de>
  */
 
+/ {
+       aliases {
+               eeprom0 = &eeprom0;
+       };
+};
+
+&i2c3 {
+       eeprom0: eeprom@50 {
+       };
+};
+
 &reg_usb_otg_vbus {
        gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
        enable-active-high;
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c 
b/board/dhelectronics/dh_imx6/dh_imx6.c
index 2969e90a70..6059f96e80 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -100,9 +100,9 @@ static int setup_dhcom_mac_from_fuse(void)
                return 0;
        }
 
-       eeprom = ofnode_path("/soc/aips-bus@2100000/i2c@21a8000/eeprom@50");
+       eeprom = ofnode_get_aliases_node("eeprom0");
        if (!ofnode_valid(eeprom)) {
-               printf("Invalid hardware path to EEPROM!\n");
+               printf("Can't find eeprom0 alias!\n");
                return -ENODEV;
        }
 
-- 
2.34.1