Add initial support of STM32MP13 family based on v5.18-rc2
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
---
(no changes since v1)
arch/arm/dts/stm32mp13-pinctrl.dtsi | 123 ++++++++++
arch/arm/dts/stm32mp131.dtsi | 358 ++++++++++++++++++++++++++++
arch/arm/dts/stm32mp133.dtsi | 37 +++
arch/arm/dts/stm32mp135.dtsi | 12 +
arch/arm/dts/stm32mp135f-dk.dts | 57 +++++
arch/arm/dts/stm32mp13xc.dtsi | 17 ++
arch/arm/dts/stm32mp13xf.dtsi | 17 ++
board/st/stm32mp1/MAINTAINERS | 1 +
8 files changed, 622 insertions(+)
create mode 100644 arch/arm/dts/stm32mp13-pinctrl.dtsi
create mode 100644 arch/arm/dts/stm32mp131.dtsi
create mode 100644 arch/arm/dts/stm32mp133.dtsi
create mode 100644 arch/arm/dts/stm32mp135.dtsi
create mode 100644 arch/arm/dts/stm32mp135f-dk.dts
create mode 100644 arch/arm/dts/stm32mp13xc.dtsi
create mode 100644 arch/arm/dts/stm32mp13xf.dtsi
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi
b/arch/arm/dts/stm32mp13-pinctrl.dtsi
new file mode 100644
index 0000000000..d2472cd8f1
--- /dev/null
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com>
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2
*/
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3
*/
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK
*/
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD
*/
+ };
+ };
+
+ sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0
*/
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1
*/
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD
*/
+ };
+ };
+
+ sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
new file mode 100644
index 0000000000..950e172e45
--- /dev/null
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com> for
STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ clk_axi: clk-axi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <266500000>;
+ };
+
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_pclk3: clk-pclk3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104438965>;
+ };
+
+ clk_pclk4: clk-pclk4 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <133250000>;
+ };
+
+ clk_pll4_p: clk-pll4_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ clk_pll4_r: clk-pll4_r {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <99000000>;
+ };
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ always-on;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_hsi>;
+ status = "disabled";
+ };
+
+ dma1: dma-controller@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dma2: dma-controller@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x40>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <3>;
+ dma-masters = <&dma1 &dma2>;
+ dma-requests = <128>;
+ dma-channels = <16>;
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp13-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ clocks = <&clk_pclk3>;
+ };
+
+ mdma: dma-controller@58000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x58000000 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <5>;
+ dma-channels = <32>;
+ dma-requests = <48>;
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x",
"arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&clk_pll4_p>;
+ clock-names = "apb_pclk";
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x",
"arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&clk_pll4_p>;
+ clock-names = "apb_pclk";
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ iwdg2: watchdog@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ clocks = <&clk_pclk4>, <&clk_lsi>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ bsec: efuse@5c005000 {
+ compatible = "st,stm32mp13-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ part_number_otp: part_number_otp@4 {
+ reg = <0x4 0x2>;
+ };
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
+ /*
+ * Break node order to solve dependency probe issue between
+ * pinctrl and exti.
+ */
+ pinctrl: pin-controller@50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp135-pinctrl";
+ ranges = <0 0x50002000 0x8400>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOH";
+ ngpios = <15>;
+ gpio-ranges = <&pinctrl 0 112 15>;
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&clk_pclk4>;
+ st,bank-name = "GPIOI";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 128 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32mp133.dtsi b/arch/arm/dts/stm32mp133.dtsi
new file mode 100644
index 0000000000..0fb1386257
--- /dev/null
+++ b/arch/arm/dts/stm32mp133.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com> for
STMicroelectronics.
+ */
+
+#include "stm32mp131.dtsi"
+
+/ {
+ soc {
+ m_can1: can@4400e000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clk_hse>, <&clk_pll4_r>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+
+ m_can2: can@4400f000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clk_hse>, <&clk_pll4_r>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32mp135.dtsi b/arch/arm/dts/stm32mp135.dtsi
new file mode 100644
index 0000000000..abf2acd37b
--- /dev/null
+++ b/arch/arm/dts/stm32mp135.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com> for
STMicroelectronics.
+ */
+
+#include "stm32mp133.dtsi"
+
+/ {
+ soc {
+ };
+};
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
new file mode 100644
index 0000000000..ee100d108e
--- /dev/null
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com> for
STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp135.dtsi"
+#include "stm32mp13xf.dtsi"
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP135F-DK Discovery Board";
+ compatible = "st,stm32mp135f-dk", "st,stm32mp135";
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ vdd_sd: vdd-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/stm32mp13xc.dtsi b/arch/arm/dts/stm32mp13xc.dtsi
new file mode 100644
index 0000000000..fa6889e305
--- /dev/null
+++ b/arch/arm/dts/stm32mp13xc.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com> for
STMicroelectronics.
+ */
+
+/ {
+ soc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_axi>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32mp13xf.dtsi b/arch/arm/dts/stm32mp13xf.dtsi
new file mode 100644
index 0000000000..fa6889e305
--- /dev/null
+++ b/arch/arm/dts/stm32mp13xf.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.tor...@foss.st.com> for
STMicroelectronics.
+ */
+
+/ {
+ soc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_axi>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
index 6451195269..d57a49820e 100644
--- a/board/st/stm32mp1/MAINTAINERS
+++ b/board/st/stm32mp1/MAINTAINERS
@@ -3,6 +3,7 @@ M: Patrick Delaunay <patrick.delau...@foss.st.com>
L: uboot-st...@st-md-mailman.stormreply.com (moderated for non-subscribers)
T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git
S: Maintained
+F: arch/arm/dts/stm32mp13*
F: arch/arm/dts/stm32mp15*
F: board/st/stm32mp1/
F: configs/stm32mp15_defconfig
--
2.25.1
