From: Peng Fan <peng....@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 4 ++++
board/compulab/imx8mm-cl-iot-gate/spl.c | 19 -------------------
2 files changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
index 433b02cceee..a7044b63699 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
@@ -84,6 +84,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&uart3 {
u-boot,dm-spl;
};
diff --git a/board/compulab/imx8mm-cl-iot-gate/spl.c
b/board/compulab/imx8mm-cl-iot-gate/spl.c
index f183704c9d2..d2d20269ba0 100644
--- a/board/compulab/imx8mm-cl-iot-gate/spl.c
+++ b/board/compulab/imx8mm-cl-iot-gate/spl.c
@@ -83,23 +83,6 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
static int power_init_board(void)
{
struct udevice *dev;
@@ -141,8 +124,6 @@ void board_init_f(ulong dummy)
arch_cpu_init();
- board_early_init_f();
-
init_uart_clk(2);
timer_init();
--
2.36.0
