On 30.05.22 08:31, Stefan Roese wrote:
On 24.05.22 10:58, Pali Rohár wrote:
SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and
therefore support for other binary formats is not required to be
present in
SPL. Boot source of proper U-Boot is defined by compile time options and
therefore it is not required to enable all possible and unused
peripherals
in SPL by default.
This change decrease size of SPL binaries.
Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
This patch causes some regressions, like on clearfog:
$ make clearfog_defconfig
$ make -s -j20
===================== WARNING ======================
This board does not use CONFIG_TIMER (Driver Model
for Timer drivers). Please update the board to use
CONFIG_TIMER before the v2023.01 release. Failure to
update by the deadline may result in board removal.
See doc/develop/driver-model/migration.rst for more info.
====================================================
/opt/kernel.org/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ld.bfd:
cmd/tlv_eeprom.o: in function `is_checksum_valid':
/home/stefan/git/u-boot/u-boot-marvell/cmd/tlv_eeprom.c:114: undefined
reference to `crc32'
/opt/kernel.org/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ld.bfd:
cmd/tlv_eeprom.o: in function `update_crc':
/home/stefan/git/u-boot/u-boot-marvell/cmd/tlv_eeprom.c:379: undefined
reference to `crc32'
make[1]: *** [scripts/Makefile.spl:525: spl/u-boot-spl] Error 1
make: *** [Makefile:2106: spl/u-boot-spl] Error 2
Could you please have a look?
Thanks,
Stefan
---
common/spl/Kconfig | 2 ++
disk/Kconfig | 2 ++
drivers/mmc/Kconfig | 1 +
drivers/usb/Kconfig | 1 +
4 files changed, 6 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 50ff113cab21..0c8df271aa59 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -218,6 +218,7 @@ config SPL_BOOTCOUNT_LIMIT
config SPL_RAW_IMAGE_SUPPORT
bool "Support SPL loading and booting of RAW images"
+ default n if ARCH_MVEBU
default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA))
default y
depends on !TI_SECURE_DEVICE
@@ -228,6 +229,7 @@ config SPL_RAW_IMAGE_SUPPORT
config SPL_LEGACY_IMAGE_FORMAT
bool "Support SPL loading and booting of Legacy images"
+ default n if ARCH_MVEBU
default y if !SPL_LOAD_FIT
depends on !TI_SECURE_DEVICE
help
diff --git a/disk/Kconfig b/disk/Kconfig
index 359af3b27e6d..81d8867ed7fc 100644
--- a/disk/Kconfig
+++ b/disk/Kconfig
@@ -60,6 +60,7 @@ config DOS_PARTITION
config SPL_DOS_PARTITION
bool "Enable MS Dos partition table for SPL"
depends on SPL
+ default n if ARCH_MVEBU
default n if ARCH_SUNXI
default y if DOS_PARTITION
select SPL_PARTITIONS
@@ -130,6 +131,7 @@ config EFI_PARTITION_ENTRIES_OFF
config SPL_EFI_PARTITION
bool "Enable EFI GPT partition table for SPL"
depends on SPL
+ default n if ARCH_MVEBU
default n if ARCH_SUNXI
default y if EFI_PARTITION
select SPL_PARTITIONS
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index f04cc44e1973..847c0ef0acc7 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -45,6 +45,7 @@ config DM_MMC
config SPL_DM_MMC
bool "Enable MMC controllers using Driver Model in SPL"
depends on SPL_DM && DM_MMC
+ default n if ARCH_MVEBU && !MVEBU_SPL_BOOT_DEVICE_MMC
default y
help
This enables the MultiMediaCard (MMC) uclass which supports
MMC and
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index ab1d061bd0d5..075e9682c435 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -50,6 +50,7 @@ config DM_USB
config SPL_DM_USB
bool "Enable driver model for USB host most in SPL"
depends on SPL_DM && DM_USB
+ default n if ARCH_MVEBU
default y
config DM_USB_GADGET
Viele Grüße,
Stefan Roese
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
