Suppress warnings when building the SPL without USB_DWC3_GENERIC
Signed-off-by: Angus Ainslie <an...@akkea.ca>
---
drivers/usb/dwc3/Kconfig | 7 +++++++
drivers/usb/dwc3/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 62aa65bf0c..f010291d02 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -30,6 +30,13 @@ config USB_DWC3_GENERIC
Select this for Xilinx ZynqMP and similar Platforms.
This wrapper supports Host and Peripheral operation modes.
+config SPL_USB_DWC3_GENERIC
+ bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue) for the
SPL"
+ depends on SPL_DM_USB && USB_DWC3 && SPL_MISC
+ help
+ Select this for Xilinx ZynqMP and similar Platforms.
+ This wrapper supports Host and Peripheral operation modes.
+
config USB_DWC3_MESON_G12A
bool "Amlogic Meson G12A USB wrapper"
depends on DM_USB && USB_DWC3 && ARCH_MESON
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 0dd1ba87cd..97b4f7191c 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_MESON_GXL) += dwc3-meson-gxl.o
-obj-$(CONFIG_USB_DWC3_GENERIC) += dwc3-generic.o
+obj-$(CONFIG_$(SPL_)USB_DWC3_GENERIC) += dwc3-generic.o
obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
obj-$(CONFIG_USB_DWC3_LAYERSCAPE) += dwc3-layerscape.o
obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
--
2.34.1
