Hi Roger,
On 31/05/22 16:32, Roger Quadros wrote:
On 06/05/2022 07:37, Neha Malcom Francis wrote:
Explicit make commands were earlier used to generate tispl.bin image,
now it is replaced using binman.
Binman picks up and packages entries according to the description of
entries given in the binman node in the device tree. The make commands
that were earlier responsible for generating tispl.bin has been removed.
k3-j721e-a72-binman.dtsi has been introduced for A72 specific binman node.
It can be included in files that require it like
k3-j721e-common-proc-board-u-boot.dtsi.
Note that make commands for secure devices has also been removed as
focus is on general purpose devices at present time.
Signed-off-by: Tarun Sahu <t-s...@ti.com>
[n-fran...@ti.com: prepared patch for upstreaming]
Signed-off-by: Neha Malcom Francis <n-fran...@ti.com>
---
arch/arm/dts/k3-j721e-a72-binman.dtsi | 86 +++++++++++++++++++
.../k3-j721e-common-proc-board-u-boot.dtsi | 1 +
arch/arm/mach-k3/config.mk | 33 -------
board/ti/j721e/Kconfig | 1 +
scripts/Makefile.spl | 4 -
5 files changed, 88 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/dts/k3-j721e-a72-binman.dtsi
diff --git a/arch/arm/dts/k3-j721e-a72-binman.dtsi
b/arch/arm/dts/k3-j721e-a72-binman.dtsi
new file mode 100644
index 0000000000..beb3424bb9
--- /dev/null
+++ b/arch/arm/dts/k3-j721e-a72-binman.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <config.h>
+
+#ifdef CONFIG_ARM64
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ tispl {
+ filename = "tispl.bin";
+ fit {
+ description = "FIT IMAGE";
+ #address-cells = <1>;
+ images {
+ atf {
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ os = "arm-trusted-firmware";
+ load = <CONFIG_K3_ATF_LOAD_ADDR>;
+ entry = <CONFIG_K3_ATF_LOAD_ADDR>;
+ atf-bl31 {
+ };
+ };
+ tee {
+ description = "OPTEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = <0x9e800000>;
+ entry = <0x9e800000>;
+ tee-os {
+ };
+ };
+ dm {
+ description = "DM binary";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "DM";
+ load = <0x89000000>;
+ entry = <0x89000000>;
+ ti-dm {
+ };
+ };
+ spl {
+ description = "SPL (64-bit)";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_SPL_TEXT_BASE>;
+ entry = <CONFIG_SPL_TEXT_BASE>;
+ u-boot-spl-nodtb {
+ };
+ };
+ k3-j721e-common-proc-board.dtb {
+ description =
"k3-j721e-common-proc-board";
+ type = "flat_dt";
+ arch = "arm";
+ compression = "none";
+ blob-ext {
+ filename =
"spl/dts/k3-j721e-common-proc-board.dtb";
+ };
+ };
+ };
+ configurations {
+ default = "conf";
+ conf {
+ description =
"k3-j721e-common-proc-board";
+ firmware = "atf";
+ loadables = "tee", "dm", "spl";
+ fdt = "k3-j721e-common-proc-board.dtb";
+ };
+ };
+ };
+ };
+};
+#endif
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index 677a72d2a2..6490d71f7e 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-j721e-a72-binman.dtsi"
/ {
chosen {
diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index 49f80ae79b..e0d9ea97c9 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -52,38 +52,5 @@ ifeq ($(CONFIG_SOC_K3_J721E),)
export DM := /dev/null
endif
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-SPL_ITS := u-boot-spl-k3_HS.its
-$(SPL_ITS): export IS_HS=1
-INPUTS-y += tispl.bin_HS
-else
-SPL_ITS := u-boot-spl-k3.its
-INPUTS-y += tispl.bin
-endif
-
-ifeq ($(CONFIG_SPL_OF_LIST),)
-LIST_OF_DTB := $(CONFIG_DEFAULT_DEVICE_TREE)
-else
-LIST_OF_DTB := $(CONFIG_SPL_OF_LIST)
endif
-
-quiet_cmd_k3_mkits = MKITS $@
-cmd_k3_mkits = \
- $(srctree)/tools/k3_fit_atf.sh \
- $(CONFIG_K3_ATF_LOAD_ADDR) \
- $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(LIST_OF_DTB))) > $@
-
-$(SPL_ITS): FORCE
- $(call cmd,k3_mkits)
endif
-
-else
-
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-INPUTS-y += u-boot.img_HS
-else
-INPUTS-y += u-boot.img
-endif
-endif
-
-include $(srctree)/arch/arm/mach-k3/config_secure.mk
You can't yet remove these as all K3 platforms are not converted to use binman.
Please include them under #ifndef CONFIG_BINMAN...#endif
One more question I have is that how are _HS binaries being created with binman?
I will make the changes accordingly that do not affect any of the other
builds. _HS binaries are not being created with binman in this series.
But there is a patch series that does create HS images (tispl.bin and
u-boot.img) using binman for AM64x:
https://patchwork.ozlabs.org/project/uboot/patch/20220509072936.12899-4-rog...@kernel.org/
diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index a3a9d504ae..3cf05f0d3b 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -14,6 +14,7 @@ config TARGET_J721E_A72_EVM
select BOARD_LATE_INIT
imply TI_I2C_BOARD_DETECT
select SYS_DISABLE_DCACHE_OPS
+ select BINMAN
config TARGET_J721E_R5_EVM
bool "TI K3 based J721E EVM running on R5"
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 6ad82cecfb..5f8a8487c5 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -577,7 +577,3 @@ $(obj)/$(SPL_BIN).multidtb.fit.gz:
$(obj)/$(SPL_BIN).multidtb.fit
$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
@lzop -f9 $< > $@
-ifdef CONFIG_ARCH_K3
-tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
- $(call if_changed,mkfitimage)
-endif
Please don't remove this but include it under #ifndef CONFIG_BINMAN...#endif
cheers,
-roger
--
Thanking You
Neha Malcom Francis
